Holy Name University
Electronics & Communications Engineering Online Review

Home    Mathematics    Electronics Engineering    Links

         Communications Engineering

Next >>>        


Problems IV
  1. Range of carrier frequencies for commercial FM broadcasting?
  2. They are subcarriers that are arranged so that the channels occupying adjacent frequency bands with some frequency space between them is known as _____?
  3. The amplitude of a train of constant width pulses is varied in proposition to the sample values of the modulating signal?
  4. Determine the bandwidth of an AM transmitter if the carrier frequency is 1000 KHz and the modulating frequency varies from 1 KHz to 10 KHz?
  5. The information of an AM signal resides in the _____?
  6. The transmission and reception of information is called _____?
  7. The process of varying some characteristic of a high frequency sine wave in accordance with the variation of the modulating signal is called _____?
  8. A 10 MHz carrier is amplitude modulated by a 100 KHz signal. What frequency components are present in the output wave?
  9. Any unwanted form of energy interfering the reception of wanted signal is called _____?
  10. The instantaneous frequency of the carrier signal is switched between two (or more) values in response to PCM code?
  11. Digital signals ______?
  12. If you are going to receive a message, for example FRIDAY, you could guess that the letter after FRIDA was Y because spoken kanguage is _____?
  13. When are bits per second and bands equivalent?
  14. If the maximum signaling speed on a certain DC cable is 2000 bps, and we are presently passing data at 600 bps, what effect would doubling the cable length have an out ability to communicate?
  15. Spacing bias distortion results in _____?




Copyright, © 2001, dwct-ece review online. All Rights Reserved.