This Autococker belongs to Ken Sinclair of Austin, Texas. It was Custom built by Bill Macke at Constant Action. and still remains one of the best Autocockers he built.

Click pics for larger image, use your browser's back feature to return.

What was done to this cocker

• Milling The body was shaved alot on the sides and the diamonds were milled into the side. The body is just about as thick as the 45 grip frame. The front block was custom made from a single block of aluminum. The back block was also made from a block of aluminum, and the barbs were machined to match the ones along the back of the marker.
• Annodizing It is a fade annodizing silver to blue.
• Modifications In addition to the extensive milling, this marker has the Constant Flow system in it. (tornado valve, lightning bolt, light springs, enlarged valve chamber.) It is running about 250 PSI. The front pneumatincs have been moved to the left side of the marker. The trigger job is very smooth and the rate of fire is very fast. It is timed such that there is suction going down the feedport. It is running a CenterFlag 4500 Nitro tank and gets a ton of shots off of it.
• notes Ken wasn't in much of a hurry for this one, so I completed it in 14 months. Ken did most of the sanding on it before it went to PKSelective

If you want to check out a couple of cool reversed cockers I built, Click here.

If you want to check out another Autococker I built, Click here.