Bolt mod

    This mod is to make your stock bolt better for LP (low pressure).  Even if you aren't going LP it is still good for your gun.

    Take out your bolt and get a pair of needle nose pliers and a lighter.   Take the needle nose pliers and grasp the venturi insert and rotate it out by going counter-clockwise.  If the venturi insert won't budge at all then take the lighter and heat up the outside of the bolt where the venturi insert is.  Then take the needle nose and try to unscrew out the venturi insert again and it should come out.  The reason for heating the bolt is to loosen the locktite they put on the insert.