Scientific Articles – 27 articles

1.

Authors:

Prof. PhD. Eng. Kumbetlian Garabet, Assist. Prof. Eng. Neamtu Laurentiu,

Assist. Prof. Eng. Oanta Emil

 

Article:

Mechanical and thermal loads in the thick plates issue

 

Published in:

REVIMAR, The Scientific Review of the Merchant Marine Institute of Constanta, 1993

 

 

 

2.

Author:

Lecturer Eng. Oanta Emil

 

Article:

Data processor associated to the FEM programs

 

Published in:

'Lucian Blaga' University of Sibiu, Faculty of Engineering, 'Acta Universitatis Cibiniensis', Vol. XIII, Applied Mechanics Series, November 17-18, 1995, Pag. 227-232

 

 

 

3.

Authors:

Prof. PhD. Eng. Kumbetlian Garabet, Assist. Prof. Eng. Comanita Daniela,

Lecturer Eng. Oanta Emil

 

Article:

A strength of materials course

 

Published in:

The International Maritime Lecturers Association, I.M.L.A. Newsletter, No. 23, June, 1997, pag. 19-22

 

 

 

4.

Authors:

Assoc. Prof. PhD. Eng. Buzbuchi Nicolae, Lecturer Eng. Oanta Emil,

Lecturer Eng. Ady ªoloiu

 

Article:

Numerical and experimental study regarding the decreasing of the level of vibrations of the hull, produced by the naval engines

 

Published in:

Romanian Register of Shipping, Technical Bulletin No. 1/1997, ISSN-1220-7357, pag. 13-22

 

 

 

5.

Authors:

Assoc. Prof. PhD. Eng. Buzbuchi Nicolae, Lecturer Eng. Oanta Emil,

Lecturer Eng. Ady ªoloiu

 

Article:

Analytical and numerical methods in studying the shaft alignment of the internal combustion engine

 

Published in:

Romanian Register of Shipping, Technical Bulletin No. 2/1997, ISSN-1220-7357, pag. 9-17

 

 

 

6.

Authors:

Lecturer Eng. Dinescu Cristian, Lecturer Eng. Oanta Emil

 

Article:

High order numerical scheme for the prediction of in-cylinder flows in reciprocating engines

 

Published in:

National forum for research in thermodynamics and thermal engines; Romanian Academy - Master Foundation, Bucharest, 1997-1998, ARFM 97/98-05, 9 pages

 

 

 

7.

Author:

Lecturer Eng. Oanta Emil

 

Article:

"Elastic center" and center of gravity of the heterogeneous cross-section of a bar

 

Published in:

'Lucian Blaga' University of Sibiu, Faculty of Engineering, 'Acta Universitatis Cibiniensis', Vol. XXIX, Applied Mechanics Series, 1998, Pag. 43-48, ISSN 1221-4957

 

 

 

8.

Author:

Emil M. Oanta

 

Article:

General planning of an experimental mechanics complex project - case study: naval internal combustion engine

 

Published in:

Scientific Review of the 'Ovidius' University of Constanta, Romania, 1999, Vol. I, Pag. 49-56, ISSN 1223-7221

 

 

 

9.

Author:

Emil M. Oanta

 

Article:

Experimental mechanics project: cooling process of a naval internal engine

 

Published in:

Scientific Review of the 'Ovidius' University of Constanta, Romania, 1999, Vol. I, Pag. 57-64, ISSN 1223-7221

 

 

 

10.

Author:

Emil M. Oanta

 

Article:

A database approach in computer aided engineering

 

Published in:

Scientific Review of the 'Ovidius' University of Constanta, Romania, 1999, Vol. I, Pag. 253-260, ISSN 1223-7221

 

 

 

11.

Authors:

Lecturer Eng. Oanta Emil, Lecturer Eng. Dinescu Cristian

 

Article:

Numerical modeling of the steady and unsteady conductive heat transfer in internal combustion engines

 

Published in:

National Forum for Research in Thermodynamics and Thermal Engines; Romanian Academy - Master Foundation, Bucharest, 1999, 8 pages

 

 

 

12.

Authors:

Dinescu Cristian, Oanta Emil

 

Article:

Modeling of the steady and unsteady 3D-flow

 

Published in:

Bulletins for Applied & Computer Mathematics, Pannonian Applied Mathematical Meetings, Interuniversity Network in Central Europe, Technical University of Budapest, 1999, BAM-1622/99 (LXXXVIII), pag. 93-104

 

 

 

13.

Authors:

Emil M. Oanta, Doina Carp

 

Article:

Computer aided decision software - case studies

 

Published in:

Scientific Review of the Maritime University of Constanta, Romania, 2000, Vol. I, Pag. 47-54, ISSN 1454-8887

 

 

 

14.

Author:

Emil M. Oanta

 

Article:

An original software for the experimental data processing

 

Published in:

Scientific Review of the Maritime University of Constanta, Romania, 2000, Vol. I, Pag. 183-190, ISSN 1454-8887

 

 

 

15.

Authors:

Emil M. Oanta, Cristian Dinescu

 

Article:

Modification of the differential operators of the heat transfer equation in a  general system of axes

 

Published in:

Scientific Review of the 'Ovidius' University of Constanta, Romania, 2000, 8 pages

 

 

 

16.

Author:

Emil M. Oanta

 

Article:

Computer aided calculus of the forces applied on a finite element method model of an engine

 

Published in:

Scientific Review of the Maritime University of Constanta, Romania, 2001, Vol. 2, Pag. 113-120, ISSN 1582-3601

 

 

 

17.

Author:

Emil M. Oanta

 

Article:

General planning of a finite element method numerical experiment in a structural problem

 

Published in:

Scientific Review of the Maritime University of Constanta, Romania, 2001, Vol. 2, Pag. 121-128, ISSN 1582-3601

 

 

 

18.

Author:

Emil Oanta

 

Article:

Comparison between the 'by-hand' calculus and the automatic computing for the method of initial parameters applied for hulls

 

Published in:

Scientific Bulletin of The Merchant Marine University, ISSN 1582-3601, Constanta, 2002, Pag. 167-172

 

 

 

19.

Author:

Emil Oanta

 

Article:

Considerations regarding the use of the method of initial parameters for curved beams

 

Published in:

Scientific Bulletin of The Merchant Marine University, ISSN 1582-3601, Constanta, 2002, Pag. 173-178

 

 

 

20.

Author:

Emil Oanta

 

Article:

An applied elasticity problem – model of a ring element belonging to a chain

 

Published in:

Scientific Bulletin of The Merchant Marine University, ISSN 1582-3601, Constanta, 2003, Pag. 47-52

 

 

 

21.

Author:

Emil Oanta

 

Article:

An original approach In the computer aided calculus of the large deflections

 

Published in:

Scientific Bulletin of The Merchant Marine University, ISSN 1582-3601, Constanta, 2003, Pag. 53-58

 

 

 

22.

Author:

Emil Oanta

 

Article:

Methods to generate random numbers employed in probabilistic approaches

 

Published in:

Scientific Bulletin of The Merchant Marine University, ISSN 1582-3601, Constanta, 2006, Pag. 175-180

 

 

 

23.

Author:

Emil Oanta

 

Article:

Methods to test the random number generators employed in the probabilistic approaches

 

Published in:

Scientific Bulletin of The Merchant Marine University, ISSN 1582-3601, Constanta, 2006, Pag. 181-186

 

 

 

24.

Authors:

Emil Oanta, Ioan Odagescu, Ilie Tamas

 

Article:

An original data processing method for cross-domain software applications

 

Published in:

Scientific Bulletin of “Transilvania” University of Braºov, Series B3–Economic Sciences 2006, http://but.unitbv.ro/BU2008/Arhiva/BU2006/Seria_B.htm,

http://but.unitbv.ro/BU2008/Arhiva/BU2006/BULETIN%20B%20PDF/054-B-OANTA_06.pdf

 

 

 

25.

Author:

Emil Oanta

 

Article:

Actual legal aspects regarding the methods to deal with threats, risks and crises

 

Published in:

Scientific Bulletin of The Merchant Marine University, ISSN 1582-3601, Constanta, 2007

 

 

 

26.

Author:

Emil Oanta

 

Article:

VR GUI

 

Published in:

Scientific Bulletin of The Merchant Marine University, ISSN 1582-3601, Constanta, 2007

 

 

 

27.

Author:

Dinu Simona, Oanta Emil

 

Article:

Applications of genetic algorithms to multiobjective stock portfolio optimization problem (Aplicatii ale algoritmilor genetici in problema multicriteriala de optimizare a unui portofoliu de actiuni)

 

Published in:

Review of Management and Economic Engineering/Revista de Management ºi Inginerie Economicã, B+, Volume 7, No. 1 (26), 2008,

http://www.revista.amier.org/abstracturi/26/20_Dinu_Oanta_RO_EN_1.doc