ݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡ
ޢݢӢڢ Service Pack 1 ^}ѡ㡨[j
qlq]pøϪ WųnI̷s 99 ~ 32 줸sI
@ DD@@jդWIII
ܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡ
ФeG
----------------
iwˤkj
wˤ覡²AЮڥؿU SETUP99.EXE w˵{I
w˵{Nw Protel 99 {A]t:
1) Advanced Schematic 99 2) Advanced PCB 99
3) Advanced Route 99 4) Advanced SIM 99
5) Advanced PLD 99
w˧AХi}Ѥkj
------------------------------------------------------------------------------
MO\৹եΪIܥiu 30 ѡInдoIbȤ@ڵ
z}ѮɶI
i}ѤkjBJkpU:
ƻsФ \UnLock99\WKTPRO99.EXE ܦw PROTEL 99 {ؿUA
q`w]ؿ \Desing Explorer 99\ UIӥؿYi}ѡI
MAProtel99SP1.exe s PROTEL 99 Service Pack 1 ̷sI
SOG}ѭקL{ǷкInnȱozɶwˡI
------------------------------------------------------------------------------
Сi[jjSO[J| Protel 99 MΪ[{ACpUG
Hole Size Editor (29 June 1999)
----------------
This add-on dislays a list of all the hole sizes used on the PCB. You can also
change any hole size, automatically updating all the affected pads and vias.
When this add-on is installed Hole Size Editor is added to the Edit menu.
* Requires Protel 99
Overlapping Hole Detector 99 (29 June 1999)
----------------------------
This add-on will detect PCB pads whose holes are overlapping. When the server is
installed Detect Overlapping Holes is added to the Tools menu in the PCB editor.
Pads with overlapping holes are listed in the Overlapping Hole Sizes dialog, double
click on an entry in the list to jump to the overlapping pads, or right-mouse click
to dislay a floating menu.
* Requires Protel 99
Specctra Interface 99 (29 June 1999)
---------------------
This add-on is used to transfer a PCB design to and from the SpecctraR autorouter.
When the add-on is installed the Specctra Interface sub menu is added to the Tools
menu. The add-on includes a Wizard that creates the DSN and DO files and automatically
starts the Specctra router. Select Interfacing to Specctra Router in the PCB editor
Help menu for more details on using the Specctra Interface. Note that Specctra does
not support file names with spaces.
* Requires Protel 99
Testpoint Finder 99 (29 June 1999)
-------------------
This Wizard analyzes the PCB and identifies possible testpoints for each net.
When the add-on is installed Testpoints is added to the Reports menu. The Wizard
allows you to define what is allowed to be used as a testpoint - including component
pads, vias, and tespoint pads (free pads). It reports the location of each testpoint,
as well as all nets without a suitable testpoint, and testpoint pads that are too
close to another testpoint pad.
* Requires Protel 99
--------------------------------------------------------------------------------
ܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡܡ
ݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡݡ
[SoftWorm]'99 Present.
Text file Source (historic): geocities.com/eureka/business/4803/1220/draw
geocities.com/eureka/business/4803/1220geocities.com/eureka/business/4803
geocities.com/eureka/business
geocities.com/eureka
(to report bad content: archivehelp @ gmail)
|
|
|
|
|