|
Repeated Items
|
| 1. Bi-Metals. Copper and Brass pipe. |
| 2. Put a good conductor INSIDE a copper pipe. |
| 3. Wrap a good conductor with a coil of copper wire and insert both
in a copper pipe. |
|
The basic idea for the ether transformer.
Use the best conductor as the core and wrap it many times with a thin
wire. Additional coils can be added to boost performance. Shield this conductor
in a copper pipe and ground one end. Bring another coil (grounded or loaded)
in to resonance with the first coil. |
|
| Tesla: He started this mess. Resonant
harmonics. Use 2 wires within a coil for boosted performance and coil efficiency. |
| Alexander: Wrap wire around the original
wire at a 3 to 1 ratio. = 2 transformers. |
| Prentice: used 500K High Voltage oscillator
to start harmonics, then a single wire picks up the energy. |
| Coler: Multiple Coils were tuned to this
energy. Magnets were used for the transformer core. |
| Britten: Wrap wire with coil and insert both
in a copper pipe. = 2 conductors |
| Markovich: Wrap wire with wire and insert
in a copper or brass tube. = 2 transformers + shield |
| Keely: Harmonics. Bi-metals. Heavy
use of precious metals. |