vg_ms6

PAPERS PUBLISHED/PRESENTED IN INTERNATIONAL CONFERENCES

1. Rao, A. N., Ganesan, V., Natarajan, R., Gopalakrishnan, K. V. and Murthy, B. S. (1977)
Study of the Disruption Pattern of a Liquid Jet in a Swirling Air Flow Using Flow

Visualization Techniques
International Symposium on Flow Visualization, Tokyo, Japan, pp.223-228.

2.     Ganesan, V. and Murthy, B. S. (1978)
         Numerical Prediction and Effectiveness of Conical Diffusers
        First International Conference on Centrifugal Compressor Technology, Indian Institute of Technology,

Madras, India, pp. D2.1 - D2.9.

3.     Ganesan, V. and Spalding D. B. (1979)
         Numerical Modelling of the Combustion of Fuel Sprays in Three Dimensional Can Combustors
        Fourth International Symposium on Air Breathing Engines, Lake Buene Vista, Orlanda, Florida,

USA, pp. 177 - 186.

4. Kamaraj, G., Ganesan, V. and Seetharamu, K. N. (1979)
Generalized Numerical Predictions for Film Condensation Problems Using Boundary

Layer Equations
Second Multiphase Flow and Heat Transfer Symposium and Workshop, University of Miami,

Miami, USA, pp. 823 - 841.

5. Kamaraj, G., Ganesan, V. and Seetharamu, K. N. (1979)
Solar Energy in the Field of Distillation : Design Parameters and Thermodynamic Analysis of

Solar Stills
Second Miami International Conference on Alternative Energy Source, Florida, USA, pp. 991 - 999.

6.     Ganesan, V. (1979)
         Flow, Performance and Effectiveness of Straight Core Annular Diffusers
        First International Conference on Numerical Methods in Thermal Problems, University College,

Swansea, U.K.

7. Rao, A. N., Ganesan, V., Gopalakrishnan, K. V. and Natarajan, R. (1979)
Effects of Chamber Size, Fuel-Air Ratio and Swirl Intensity on the Gas Dynamics in an

Axi-Symmetric Combustor
Sixth International Symposium on Combustion Processes, Poland.

8. Kamaraj, G., Ganesan, V. and Seetharamu, K. N. (1980)
A Theoretical Study of Heat and Mass Transfer Processes in Horizontal Plane and

Inclined Stepped Solar Stills
Third International Conference on Alternative Energy Sources, Florida, USA.

9. Badami, M. G., Ayyasamy, R. Nagalingam, B., Ganesan, V., Gopalakrishnan, K. V. and

Murthy, B. S. (1980)
Performance and Aldehyde Emissions of a Surface Ignition Alcohol Engine and

Comparison with Spark Ignition Engines
Third International Symposium on Alcohol Fuel Technology, Brazil.

10.    Kamaraj, G., Ganesan, V. and Seetharamu, K. N. (1980)
         Numerical Modelling of Heat Transfer Processes in Annular Pipes
        International Conference on Numerical Methods on Non-linear Problems, Swansea, UK.

11. Sampath, S., Ganesan, V. and Gowda, B. H. L. (1980)
An Improved Method for the Measurement of Turbulence Quantities in Three

Dimensional Flows and Its Evaluation in a Round Jet
First Asian Congress in Fluid Mechanics, Bangalore, India.

12. Sampath, S., Ganesan, V. and Spalding, D. B. (1981)
Numerical Prediction of Droplet Combustion in a Gas Turbine Combustor Using a

Two Step Reaction Model
First Specialist Meeting (Int.) of the Combustion Institute, University of Bordeux, France, pp. 217 - 223.

13.   Ganesan, V. and Gowda, B. H. L. (1981)
        Numerical Prediction of Turbulent Boundary Layer Development on a Two Dimensional Curved Wall
        Second International Conference on Numerical Methods in Laminar and Turbulent Flow, Venice,

pp. 531 - 540.

14. Subba Rao, K., Ganesan, V., Gopalakrishnan, K. V. and Murthy, B. S. (1982)
Burning Rates in Alcohol Fueled S.I. Engines - Comparison of Reynolds Parameter

and Eddy Entrainment Models
Fourth International Symposium on Alcohol Fuel Technology, New Zealand.

15.   Ganti Gopal, Ganesan, V., Gopalakrishnan, K. V. and Murthy, B. S. (1982)
         Use of Vegetahols in Diesel Engines
        Fourth International Symposium on Alcohol Fuel Technology, New Zealand.

16.   Vasanth Kumar Victor, Shankar Balakrishnan and Ganesan, V. (1983)
         Numerical Modelling of Two Dimensional Combustion Initiated by Surface Ignition
        Third International Conference on Numerical Methods in Thermal Problems, Univ of Washington, USA.

17.   Devapaul, G., Ganesan, V. and Sitarama Rao, T. L. (1983)
         Numerical Prediction of Flow Characteristics of Confined Turbulent Premixed Flames
        Third International Conference on Numerical Methods in Thermal Problems, University of

Washington, USA, pp. 1 - 11.

18. Devapaul, G., Ganesan, V. and Sitarama Rao, T. L. (1983)
Numerical Prediction of Combustion Characteristics and Flame Shapes in

Confined Turbulent Premixed Flames
Third International Conference on Numerical Methods in Thermal Problems, University of

Washington, USA, pp. 751 - 761.

19.   Shankar Balakrishnan, Vasanth Kumar Victor and Ganesan, V. (1983)
         Numerical Simulation of Unsteady Combustion Initiated by a Flat Hot Surface
        Third International Conference on Numerical Methods in Thermal Problems, University of

Washington, USA, pp. 869 - 877.

20.   Sampath, S. and Ganesan, V. (1983)
         Visualization of Recirculating Flows Behind Flame Holders
        Third International Symposium on Flow Visualization, University of Michigan, USA.

21. Devapaul, G., Ganesan, V. and Sitharama Rao, T. L. (1984)
An Improved Eddy Break-Up Model for the Prediction of Mixing and Combustion

Characteristics of Premixed Turbulent Flames
Twentieth International Symposium on Combustion, University of Michigan, Ann Arbor, Michigan, USA.

22.   Sampath, S. and Ganesan, V. (1984)
         Mathematical Modelling of Combustion in Gas Turbine Combustion Chambers
        Twentieth International Symposium on Combustion, University of Michigan, Ann Arbor, Michigan, USA.

23.   Reddy, K. V., Ganesan, V. and Gopalakrishnan, K. V. (1986)
         Turbulence Characteristics in a Small Capacity Two-Stroke Spark Ignition Engine
        Third Asian Congress on Fluid Mechanics, Tokyo, Japan.

24.   Reddy, K. V. and Ganesan, V. (1987)
         Fuel Economy in Two-Stroke Spark Ignition Engines - A New Technique in the Scavenging Process
        Fourth International Pacific Conference on Automotive Engg, Melbourne, Australia.

25.    Varaprasada Rao, R., Nagalingam, B., Ganesan, V. and Gopalakrishnan, K. V. (1988)
         Alcohol Fuelling : Effect of Induction Swirl on Aldehyde Emissions
        International Symposium on Alcohol Fuels, Tokyo, Japan, pp. 437.

26.   Jeyachandran K. and Ganesan, V. (1989)
         Investigations in Adverse Pressure Gradient Flow
        Fourth Asian Congress on Fluid Mechanics, Hong Kong, pp. A37- A40.

27.   Ramachandra Raju,V., Mahalakshmi, N.V., Pawar, C.B., Srinivasa Rao, P. and Ganesan,V. (1991)
         Turbulent Wakes in a Conical Diffuser - A Numerical Approach
        Eighth International Conference on Mathematical and Computer Modelling, USA.

28. Ganesan, V., Srinivasa Rao, P., Mohan Krishna, D. and Rajagopal, K. (1991)
In-cylinder Fluid Flow Analysis during the Compression Process of a Four-Stroke

Compression Ignition Engine - A Three Dimensional Approach
International Conference on Computational Engineering Science, Melbourne, Australia, pp.294-298.

29. Ramachandra Raju, V., Mahalakshmi, N. V., Srinivasa Rao, P. and Ganesan, V. (1991)
Flow Predictions in Adverse Pressure Gradient Conditions With Low Reynolds

Number Turbulence Models - A Comparative Study
International Conference on Computational Engineering Science, Melbourne, Australia, pp.864-869.

30.   Ravichandran, M., Thangavelu, C., Ganesan, V. and Sundararajan, V. (1992)
         Numerical Prediction of Isothermal Flow in an Afterburner Model
        International Conference on Computational Methods in Engineering, Singapore, Vol.1, pp.688-693.

31. Mahalakshmi, N.V., Ramachandra Raju, V., Pawar, C.B. and Ganesan, V. (1992)

Turbulent Wakes in a Conical Diffuser - A Numerical Approach
International Conference on Computational Methods in Engineering, Singapore, Vol.1, pp.694-699.

32. Balagurunathan, K., Nedunchezhian, N., Srinivasa Rao, P. and Ganesan, V. (1993)
Comparative Study of Copper Coated Alumina and Iron Ore Catalysts in the Reduction

of Oxides of Nitrogen in a Direct Injection Diesel Engine Exhaust
Second International Conference on Combustion Technology, Lisbon, Portugal.

33.   Ravichandran, M and Ganesan, V. (1993)
         A Study on 3D Velocity Distribution of Isothermal Flows Behind an Afterburner Flame Stabilizer
        XI International Symposium on Air Breathing Engines, Tokyo, Japan.

34.   Balagurunathan, K., Srinviasa Rao, P., and Ganesan, V. (1993)
         Reduction in NOx in a DI Diesel Engine Using Internal Exhaust Gas Recirculation
        International Conference on Maritime Technology: Challenges in Safety and Environmental

Protection, Singapore.

35.   Baby Chacko, Ganesan, V. and Natarajan, R. (1994)
        Numerical Prediction of Mixing Phenomena of Two Inclined Jets in a Confined Space
        First Asian Computational Fluid Dynamics Conference, Bangalore, India, 1994

36. Balasubramanian, V., Sridhara, K. and Ganesan, V. (1995)
Performance Evaluation of a Small Agricultural Engine Operated on Dual Fuel

(Diesel + Natural Gas) System
Small Engine Technology Conference, Milwankee, USA.

37.   Balasubramanian, V., Sridhara, K. and Ganesan, V. (1995)
         Use of Natural Gas as an Alternative Fuel to Power Small Agricultural Engines
        Fifth International Conference on Small Engines, Their Fuels and the Environment,

University of Reading, UK.

38. Balasubramanian, V., Sridhara, K. and Ganesan, V. (1995)
Experimental Investigation on the Combustion of Natural Gas in Dual Fuel

(Diesel + Natural Gas) Diesel Engine
Third Asian Pacific International Symposium on Combustion and Energy, Hong Kong

Polytechnic, Hong Kong.

39.   Nagesh S. Mavinahally, Roy Kamo and Ganesan, V. (1997)
         Two-stroke Engine Design with Selective Exhaust Gas Recirculation - A Concept
        SETC Conference, USA.

40. Mallikarjuna, J.M. and Ganesan, V. (1999)
Variable Valve Timing and Variable Compression Ratio Engine for Improved Performance and

Reduced Emissions at Part Loads – A Numerical Prediction with Experimental Comparisons
VI Conference on Small Engines, their Fuels and the Environment, UTM, Johor Bahru,

Malaysia, pp.118–124.

41.   Ganesan, V. (2001)
         CFD – An Overview
        Short Term Course on Computations of Internal Flows, IIT Madras, June 11–16, 2001, pp.1.1–1.9.

42.   Ganesan, V. (2001)
         The Art of Combustion Modelling using CFD – A Review
        Short Term Course on Computations of Internal Flows, IIT Madras, pp.15.1–15.16.

43. Jagdish, D.K., Govindarajan,S., Balasubramaniam, V. and Ganesan, V. (2002)
Theoretical And Experimental Investigation Of Metering Characteristics Of a Variable

Venturi Mechanically Controlled Carburettor
2nd International SAE Mobility Conference, India, Jan.10-12, 2002, pp.111–116

44. Praphull S Lal and Ganesan, V. (2002)
Flow Field behind the Flame Holders in an Isothermal Model of an Afterburner –

A Theoretical Study
2nd International SAE Mobility Conference, India, Jan.10-12, 2002, pp.167–172

45.   Suresh, D. and Ganesan, V. (2002)
         Modeling of Reacting Flows In An Afterburner
        2nd International SAE Mobility Conference, India, Jan.10-12, 2002, pp.173–178

46.   Vasudevan, A. and Ganesan, V. (2002)
         Simulation of Isothermal Flow Field Structure In A Gas Turbine Combustor
        2nd International SAE Mobility Conference, India, Jan.10-12, 2002, pp.179–186

47.   Balasubramaniam, V. and Ganesan, V. (2002)
         Modelling of Combustion in a Gas Turbine Combustion System
        2nd International SAE Mobility Conference, India, Jan.10-12, 2002, pp.187–194

48.   Basu, P. and Ganesan, V. (2002)
         Flow Through Zero Degree Hubbed Vanes – A Theoretical Study
        2nd International SAE Mobility Conference, India, Jan.10-12, 2002, pp.231–236

49. Mallikarjuna, J.M. and Ganesan, V., (2002)
Theoretical and Experimental Investigations of Extended Expansion Concept

for SI Engines
2002 SAE International Spring Fuels & Lubricants Meeting, Reno, Nevada, USA, May 6-9, 2002

50. Suresh Kumar, J, Balasubramanian, V. and Ganesan, V., (2004)
Flow Field Analysis of a Multicylinder SI Engine Air Intake System Using Computational

Fluid Dynamics
SAE 2004 India Mobility Conference – Third International Conference on Synergy of Fuel and

Automotive Technology for a Cleaner Environment, New Delhi, India, Jan.16–18, 2004,

pp.44–53, SAE Paper 2004–28–0010.

51.   Sivakumar, M., Balasubramanian, V and Ganesan, V.
         Flow Field Analysis of a Carburettor using CFD
        Symp. of International Automotive Technology (SIAT 2005), ARAI, Pune, Jan. 19-22, 2005, pp 681

52.   Suresh Kumar, S., Anand Kumar, T. and Ganesan, V.
         Numerical Study of Isothermal Flow in an Afterburner System using Star CD
        2nd Star CD User Conference conducted by CD-Adapco, Hotel Le Meridien, Bangalore,

7th Feb. 2005.

53. Anand Kumar, T., Suresh Kumar, S. and Ganessan, V.
Study of Flow through the Intake Manifold of a Four Stroke Single Cylinder

SI Engine Using StarCD
2nd Star CD User Conference conducted by CD-Adapco, Hotel Le Meridien,

Bangalore, 7th Feb. 2005.

54.   Ganesan, S., Kishore Kumar, S., Venkataraman Shankar and Ganesan, V.
         Cold and Hot Flow Analysis in an Afterburner of a Gas Turbine Engine
        2nd Star CD User Conference conducted by CD-Adapco, Hotel Le Meridien,

Bangalore, 7th Feb. 2005. (Got the first prize as the best paper Presented at the Conference)

55.   Alfred Herman, S. and Ganesan, V.
         Effect of Injection Rate Control in a HSDI Diesel Engine
        Sixth International Symposium on Diagnostics and Modeling of Combustion in

Internal Combustion Engines”, COMODIA 2004, Yokohama, Japan, August 2-5, 2004,

(Paper No. A-4, 189).

56. Jyothishkumar, V. and Ganesan, V. (2005)
Non-reacting and Reaction Flow Analysis of Annular Gas Turbine Combustor

for LCE Applications
SAEINDIA International Mobility Engineering Congress & Exposition – 2005,

Oct.23–25, 2005, Chennai

57. Khader Basha, M., Soundarapandian, T., Kumaravelu,V., Balakrishna Reddy, B., Achuthan, N.,

        Krishna Vasudevan, Ramesh, A. and Ganesan, V. (2005)
         Development of a Controller for a 1000 HP Engine of an Armoured Fighting Vehicle
        SAE Paper No. 2005–26–302 pp.9–14.

58.   Alfred Herman, S. and Ganesan, V. (2005)
         The Effect of Induced Swirl Pattern on TDC Flow Field in a HSDI Diesel Engine
        SAE Paper No. 2005–26–319 pp. 123– 130

59.   Thiyagarajan, P. and Ganesan, V. (2005)
         Study of Flow through Air Filter for Off-Highway Vehicle – A Preliminary CFD Approach
        SAEINDIA International Mobility Engineering Congress & Exposition – 2005, Oct.23–25, 2005,

Chennai, SAE Paper No. 2005–26–339, pp. 247–252

60.   Karunakaran, E. and Ganesan, V. (2005)
         Study of Turbulence Models in Flows through Adverse Pressure Gradient System
        2005 ASME International Mechanical Engineering Congress and Exposition,

Nov.5–11, 2005 at Orlando Florida

61.   Suresh Kumar, S. and Ganesan, V. (2005)
         Flow Investigations in an Aero Gas Turbine Engine Afterburner
        2005 ASME International Mechanical Engineering Congress and Exposition, Nov.5–11, 2005

at Orlando Florida

62.   Jyothishkumar, V. and Ganesan, V. (2005)
         Gas Turbine Combustor – Modeling and Optimization
        2005 ASME International Mechanical Engineering Congress and Exposition, Nov.5–11, 2005

at Orlando Florida

63.   Thundil Karuppa Raj, R. and Ganesan, V. (2005)
         Numerical and Experimental Investigation of Flow through Vane Swirlers
        2005 ASME International Mechanical Engineering Congress and Exposition, Nov.5–11, 2005

at Orlando Florida

64. Jyothishkumar, V. and Ganesan, V. (2005)
A Study on the Effect of Hole Diameter in Dome and Flare Region of An Annular

Gas Turbine Combustor
Fourteenth ISME International Conference on Mechanical Engineering in Knowledge Age,