vg_ms6

PAPERS PUBLISHED/PRESENTED IN NATIONAL JOURNALS

1. Ganesan, V. and Gopalakrishnan, K. V. (1973)

Turbulence Level Distribution in the Flame Stabilizing Zone of Gas Turbine Combustion Chambers Models

Journal of the Institution of Engineers (India), Vol.54, Pt. ME 2, pp. 66 -- 68.

2. Ganesan, V. and Murthy, B. S. (1974)

Charts for Velocity and Reynolds Number Computations

Journal of Institution of Engineers (India), Vol.55, pp. 1 -- 2.

3. Ganesan, V., Sunder Raman, J. and Murthy, B. S. (1975)

An Experimental Study of the Effect of Inlet Swirl on Intensity of Turbulence in a Cold Model of a Swirl Type Combustor

Indian Journal of Technology, Vol.13, pp. 386 -- 389.

4. Ganesan, V., Jagadeesan, T. R. and Murthy, B. S. (1976)

Velocity Measurement Based on Principles of Heat Transfer from Electrically Heated Wires Journal of Institution of Engineers (India), Vol.56, Pt. ME 5, pp. 245 -- 249.

5. Karandikar, A. R., Ganesan, V. and Murthy, B. S. (1978)

Comparison of Two Bluff Bodies on the Recirculation Phenomena in the Primary Zone of an Isothermal Model of a Gas Turbine Combustion Chamber

Indian Journal of Technology, Vol.16, pp. 275 -- 277.

6. Jagadeesan, T. R., Ramalingam, K. K., Ganesan, V. and Murthy, B. S. (1978)

Air Motion Studies in the Cylinder of a Two Stroke Diesel Engine

Journal of Institution of Engineers (India), Vol.59, Pt. ME 1, pp. 47 -- 50.

7. Ganesan, V. (1980)

Numerical Computation of Turbulent Flow Behind a Conical Baffle

Indian Journal of Technology, Vol.18, pp. 447 -- 450.

8. Ganesan, V. and Murthy, B. S. (1982)

Direct Energy Conversion

Industrial Engineering Journal, Vol.XI, No.2, pp. 69 -- 77.

9. Gupta, B. and Ganesan, V. (1984)

Experimental Investigation of Performance Characteristics of a Small Four-Stroke S.I. Engine with Different Fuel Blends

Journal of the Institution of Engineers (India), Vol.64, Pt. ME 4, pp. 147 153.

10. Ganesan, V. (1985)

Numerical Modelling of the Flow and Combustion Process in Three Dimensional Can Combustors

Indian Journal of Technology, Vol.23, pp.256-262.

11. Kamaraj, G., Ganesan, V. and Seetharamu, K. N. (1987)

Application of Finite Difference Method in the Prediction of Laminar and Turbulent Plane Flows

Indian Journal of Technology, Vol.25, pp. 47 -- 52.

12. Sampath, S. and Ganesan, V. (1988)

Mathematical Modelling of Axi-Symmetric Swirling Flows in Cylindrical Ducts

Journal of Institution of Engineers (India), Vol.68, Part ME5, pp. 123 -- 126.

13. Ramani, N., Ganesan, V. and Gopalakrishnan, K. V. (1988)

Digital Ignition and Variable Exhaust Port Timing Control for High Performance Moto Cross Two-Stroke Gasoline Engine

Journal of Automobile Engineering (India).

14. Vince Joseph, Shet, U. S. P. and Ganesan, V. (1989)

Flow and Flame Characteristics in a New Swirl Burner

Journal of Aeronautical Society of India, Vol.41, No.3, pp. 295 -- 300.

15. Ganesan, V. (1990)

Automotive Gas Turbine -- A Review of Alternative Solutions

Journal of Institution of Engineers (India), Vol.70, pp. 88 -- 92.

16. Ramachandra Raju, V., Mahalakshmi, N.V., Srinivasa Rao, P. and Ganesan, V.

(1990)

Predictions of Flow and Boundary Layer Development in Adverse Pressure Gradient Flows

Journal of Aeronautical Society of India, Vol.42, pp 287-292.

17. Ganesan, V., Devapaul, G. and Sitharama Rao, T. L. (1993)

Modelling of Confined Auxiliary Flow Stabilized Premixed Flames

Indian Journal of Technology, Vol.31, pp.59-66.

18. Mahalakshmi, N. V., Pawar, C.B., Ramachandra Raju, V. and Ganesan, V. (1993)

Theoretical Investigations in Annular Diffusers of Two Different Configurations -- A Comparative Study

Journal of Institution of Engineers, Vol.73, pp.297-303.

19. Subramaniyam, S., Chandrasekaran, S., Ganesan, V., and Srinivasa Rao, P. (1993)

Experimental Investigation of Turbulence Scales in an Open and Swirl Combustion Chambers of a Diesel Engine

Journal of the Institution of Engineers (India), Vol.74, pp.40-45.

20. Lingaiah Naidu, M. Mohan Krishna, D., Ganesan, V. and Keshavamurthy, B.G.

(1993)

Carburettor Simulation for RPV Applications

Journal of Aero Society of India, pp.218-229.

21. Subramaniyam, S., Srinivasa Rao, P. and Ganesan, V. (1994)

Flow Investigations in Open and Swirl Combustion Chamber of I.C. Engines -- A Comparison

Indian Journal of Engineering and Materials Sciences, Vol.1, pp.26-34.

22. Mohan Krishna, D., Rajagopal, K. Srinivasa Rao, P. and Ganesan, V. (1994)

Three Dimensional Modeling of Fluid Flow in a Four-Stroke Compression Ignition Engine

Indian Journal of Technology, Vol.1, pp.135-148.

23. Ram Reddy, P., Mohan Krishna, D., Govinda Mallan, K.R. and Ganesan, V. (1994)

Simulation of Exhaust and Intake Processes in a Four-stroke Direct-Injection Diesel Engine by Control Volume Approach

Indian Journal of Technology, India, Vol.1, pp.189-194.

24. Pandey, P.K., Mahalakshmi, N.V., Shet, U.S.P., Ganesan, V., and Syed Aga Jan

(1994)

Numerical Modelling of Turbulent Flow through Annular Diffusers

Journal of Institution of Engineers, India, Vol.75, pp.41-48.

25. Nedunchezhian, N., Balagurunathan, K., Srinviasa Rao, P., and Ganesan, V. (1994)

Shrouded Inlet Valves for Trade off between Power and Emissions

Indian Journal of Engineering and Materials Sciences, Vol.1, pp.241-245.

26. Ravichandran, M. and Ganesan, V. (1994)

Mean Flow Fields in a Confined Isothermal Flow Downstream of an Afterburner Flame Stabilizer

Indian Journal of Engineering & Materials Sciences, Vol.1, pp.309-319.

27. Balagurunathan K., Sunkanna M., Ganesan, V. and Srinviasa Rao, P. (1995)

Experimental Investigation on the Trapping Performance of the Ceramic Filter for Controlling Diesel Particulate Emissions

Journal of Traffic and Transportation, Vol.1, No.1, pp.5-13.

28. Joseph George and Ganesan, V. (1995)

Numerical Solution of 3D Incompressible Flows using Body Fitted Coordinate System

Indian Journal of Engineering & Materials Sciences, Vol.2, pp.1-7.

29. Gopinath, R. and Ganesan, V. (1995)

New Methodologies in Numerical Simulation of Gas Turbine Combustor Flows

Journal of Institution of Engineers, India, Vol.76, pp.125-129.

30. Nedunchezhian, N., Balagurunathan, K., Srinviasa Rao, P., and Ganesan, V. (1995)

Reduction of Nitrogen Oxide Emissions using Nickel-Copper Alloy Catalyst in Diesel Engines

Indian Journal of Engineering and Materials Sciences, India, Vol.2, pp.167--171.

31. Ganesan, V. and Gopalakrishnan, K.V. (1995)

Air Pollution from Internal Combustion Engines - Its Origin and Control

Journal of Traffic and Transportation, Vol.1, No.4, pp.152-168.

32. Ram Reddy, P., Mohan Krishna, D., Govinda Mallan, K.R. and Ganesan, V. (1996)

Modelling of Direct Injection Diesel Engine Combustion and Emissions -- An Easy and Reliable Method

Indian Journal of Engineering and Materials Sciences, India, Vol.3, pp.1--8.

33. Ravichandran, M. and Ganesan, V. (1996)

Isothermal Flow Modelling of Gas Turbine Afterburners

Journal of Institution of Engineers, India, Vol.77, pp.67-75.

34. Vidyadhara, T.S., Ganesan, V. and Srinivasa Rao, P. (1996)

Hydrodynamic Analysis of Internal Combustion Engine Crankshaft Main Bearingins

Communicated to Indian Journal of Engineering and Materials Sciences.

35. Anand, P. and Ganesan, V. (1997)

Combustion Models for Direct Injection Diesel Engines : A Review, Comparison and Analysis

Journal of Institution of Engineers, India, Vol.78, pp.161-173

36. Anand, P., Govinda Mallan, K.R. and Ganesan, V. (1997)

A Comparison of Ideal Cycle Simulation with Actual Simulation for a DI Diesel Engine Accepted for publication in the Journal of Traffic and Transportation.

37. Michael Kumar, T., Ganesan, V. and Natarajan, R. (1997)

Numerical Prediction of Expansion of a Rectangular Confined Jets With and Without the Effects of Swril

Journal of Institution of Engineers, India.

38. Mallikarjuna, J.M. and Ganesan, V. (1998)

The Performance Characteristics of Extended Expansion Four-Stroke Spark-Ignition Engine – Numerical Prediction and Experimental Comparison

Journal of Institution of Engineers, India, Vol.79, pp.128 – 133.

39. Michael Kumar, T., Ganesan, V. and Natarajan, R. (1999)

Numerical Prediction of Mixing of Four Axial Rectangular Confined Jets in the Presence of an Axial Central Swirling Jet

Indian Journal of Engineering and Material Sciences, India, Vol.6, pp.307–322.

40. Ganesan, V. (2000)

Emission Reduction in Two-stroke SI Engines using Stratified Charging Concept – A Review

Journal of Institution of Automobile Engineers (India), pp.39–49.

41. Viswanath, KBSN. and Ganesan, V. (2001)

Experimental and Numerical Investigation of an Axisymmetric Free Jet

Indian Journal of Engineering and Material Sciences, India, Vol.8, pp.189–197.

42. Sunil V Unaune and Ganesan V (2003)

Flow Field Studies in an Afterburner

Journal of Institution of Engineers, India, Vol.84, pp.165–170.

43. Suresh Kumar, J. and Ganesan, V. (2004)

Flow Analysis Of S.I. Engine Air Intake System During Idling

Journal of Institution of Engineers, India, Vol.85,pp.118-121

44. Sarveswaran, V., Capt YVS Murthy (IN) and Ganesan, V. (2003)

An Experimental Investigation On The Performance Comparison of a Wankel Engine with

Carburetion and Fuel Injection

Communicated to Journal of Institution of Engineers, India.

45. Rajkumar, M., and Ganesan, V. (2004)

Analysis of Non-Reacting Flow in an Aircraft Gas Turbine Engine Afterburner

Model Using Finite Volume Method

Indian Journal of Engineering and Material Sciences, India, Vol.10, pp.341-352

46. Sunil V Unaune and Ganesan V (2004)

Analysis of reacting flows in an aero-engine afterburner using computational fluid dynamics

Indian Journal of Engineering and Material Sciences, India, Vol.11, pp.31–37.

47. Kale, S.C. and Ganesan, V. (2004)

Investigation of the Flow Field In the Various Region of Intake Manifold of a SI Engine

Indian Journal of Engineering and Material Sciences, India, Vol.11, pp.85–92.

48. Suresh Kumar, J. and Ganesan, V. (2004)

Flow Through S.I. Engine Air Intake System Using CFD At Part Throttle And Full Throttle

Indian Journal of Engineering and Material Sciences, India, Vol.11, pp.93–99.

49. Ananda Reddy, G. and Ganesan, V. (2004)

Non-Reacting Flow Analysis from Combustor Inlet to Outlet Using Computational

Fluid Dynamics Code

Defence Science Journal, India, Vol.54, No.4, pp.455-467.

50. Bharat Krishna, S. and Ganesan, V. (2005)

CFD analysis of flow through vane swirlers

Journal of Institution of Engineers, India, Vol.86, pp.12-19.

51. Kale, S.C. and Ganesan, V. (2005)

A Study of Steady Flow Through a SI Engine Intake System Using CFD

Journal of Institution of Engineers, India, Vol.86, pp.61–65

52. Ananda Reddy, G. and Ganesan, V. (2005)

A Numerical Study of Pre-Diffuser Optimization of an Aero Gas Turbine Combustion Chamber

Indian Journal of Engineering and Material Sciences, India, Vol.12, No.4, pp.281–291

53. Ganesan, S., Kishore Kumar, S. and Ganesan, V. (2005)

CFD Study of Isothermal Flow in an Afterburner System

Indian Journal of Engineering and Material Sciences, India, Vol.12, pp.487–497

54. Mallikarjuna, J.M. and Ganesan, V. (2006)

Optimization of inlet valve closure timing and clearance volume of a SI engine for

better performance at part loads – a numerical and experimental approach

Indian Journal of Engineering and Material Sciences, India, Vol.13, pp.307–321

55. Suresh Kumar S. and Ganesan, V. (2006)

Mean Flow Field Measurements In An Axisymmetric Afterburner Model With V-Gutter Flame Stabilizer

Accepted for publication in Journal of Institution of Engineers, India.

56. Suresh Kumar S. and Ganesan, V. (2005)

Measurement of mean flow characteristics behind a complex V-gutter flame stabilizer used in afterburners and their numerical predictions

Communicated to Indian Journal of Engineering and Material Sciences, India

57. Suresh Kumar S. and Ganesan, V. (2005)

Flow investigation in an isothermal model of an aero gas turbine afterburner

Communicated to Defence Science Journal, India