In my pics in the photo gallery, you might have wondered how I hade my chopper flying.
Actually it is vere easy to do this with you chopper too!

Step 2: Fin three pieces of wood that are 4 feet long, and 2 inches wide.

Step 3: Now find two flat boards about 2 feet long andabout 10 inches Wide. (I used Peg board.)

Step 4:Take the three 4 foot long peices, and nail or skrew them into an "U" Shape. see diagram here.

Step 5. Attach the "U" to the Two flat peices so that the weight is even and it can stand.

Step 6: Get two hooks (not fishing hooks, the kind with the skrew on the end.) and attached so the are evenly space out about 5 inches out from one each of the 'legs'.

Step 7: Get some Fishing Line or some sort of near invisible wire and attach it to the hooks. You will need two pieces that are the same length.

Step 8: Bring one line through the cockpit of the chopper and attach that to the hook. Bring the other through the compartment in the back and attach that to the hook. Take another piece of string and tie that around the center of the horizantal bar and tie the other in the place where the body connect to the tail.

After this you should have a stand to hang your chopper from.