1) MATT BOARD 

2) CHAMPAGNE BOTTLE (You can download the bottle from this page)

3) "2000" EMBOSSER (You can purchase this from the Living Victorian Gift Shop)

4) GOLD LABEL (Diameter 2")

5) FASTENER

6) CRAFT GLUE

7) SCISSORS

8) GOLD CORD

9) PHOTO (Optional)

10) GOLD RHINESTONE

Let's Create Our "2000" Ornament:
 

1) Download and print out the champagne bottle picture, and cut out the bottle. 
(Recommend to use High Resolution Color Ink Jet Printer )

Click here to download JPG image
Click here to download PDF
(Require Adobe Acrobat Reader 4.0)
 
 

2) Glue the cut bottle onto the matt board. Make sure to put your glue onto the bottle with an old credit card to smooth the glue out. 
Let it dry completely. 
 
 

3) Cut the bottle from the matt board carefully with a sharp scissor or craft knife. 
 
 

4) If the edges of the bottle are rough, you may use a nail file to smooth them out. 
 
 

5) Cut a piece of matt board size 2" diameter. Emboss your gold seal with the "2000" Millennium Embosser, which is available in our Gift Shop and apply to circle you have just cut. 
 
 

6) Glue your picture onto the bottle before you fasten your seal. 
 
 

7) Using your scissors make a small hole in your bottle and "2000" seal circle. 
 
 

8) Put your fastener through the circle with the hole and apply to the hole in the bottle. Fasten on the back. 
 
 

9) Glue your gold rhinestone to the top of the fastener. 
 
 

10) Glue your hanging cord to the back approximately 3 inches.

Your are done!!! 

These will make great package decorations that hold many special memories. 

HAPPY CREATING!