History

Quick jump to: [Top] [Bottom]

v2.00, 2.02, 2.03, 2.05, 2.30, 2.40, 2.50, 2.51, 2.55, 2.65, 2.66, 2.67,
v2.70, 2.71, 2.72, 2.73, 2.74, 2.75, 2.76, 2.77, 2.78, 2.79,
v2.80, 2.81, 2.82, 2.83, 2.84, 2.85, 2.86, 2.87, 2.88, 2.89,
v2.90, 2.91, 2.92, 2.93, 2.94, 2.95, 2.96, 2.97,

v2.00 -- exi202.exe 158 KB

  1. New: DXB format,

  2. New: advanced curve capabilities,
  3. New: popup windows: Cursors, Connections, PictureInfo, Temperature, Window2 with derivative.

v2.02

  1. New: possibility to grow up the different. kinds of measurements using the same dialog (previously called CVC) specifying DoIt_Functions.

v2.03

  1. New: When using MeasureDlg It shows name of measurement in title.

  2. New: Output to .Dat files supported! Simply specify name.dat in save
  3. New: dialog. Data Files Options dialog also added.
  4. New: See Options|Data File Options.

v2.05

  1. Changed: meaning of GetCurrentR? in exi.ini file. Now resistance is associated with currents but not with analog input numbers.

  2. New: new kinds of GetCurrents included -1 and -2 (see exi.ini)

v2.30 -- ISI version

  1. New: Ic vs. magnetic field implemented -- basic version, but reliable;

  2. New: Math|Resistance&Ic from curve;
  3. New: Math|X <--> Y;
  4. New: Math|repl CRV by Drv;
  5. New: Options|Averaging;
  6. New: included Ic(H) criteria into Options|Math;
  7. New: Customized for NI-DAQ boards (ISI);

v2.40

  1. New: Current & Voltage Setup;

  2. New: User's ini files supported.
  3. Some bugs fixed.

v2.50

  1. New: new fast algorithm for Ic(H)

  2. New: Ic<H> Setup Dialog;
  3. Bug fixed: in GetCurrent();
  4. New: added test on range in SetCurrent();

v2.51

  1. New: When writing dat-file creates additional txt file with comments.

v2.55

  1. Bug fixed: in averaging

Quick jump to: [Top] [Bottom] [v2.70] [v2.80] [v2.90]
v2.65

  1. New: Curve management,

  2. New: honest current measurements,
  3. New: dat-file import/export supported(incl. INI file with all settings),
  4. New: DXB import/export support frozen.
  5. New: Keyboard in Modeless Dlgs support;
  6. New: "go start/stop" buttons in MesureDlg;
  7. New: Options|Save position of main window in user ini-file;
  8. New: Math|Relative to curve function added.

v2.66

  1. New: Show partial graph if measurements were interrupted by user or internally;

  2. New: Distinguish current&voltage intScales;
  3. New: Add the initialization of Current/Voltage KindOf/CurrVal arrays into init proc,
  4. Bug Fixed: Corrected small bug in Ic(H) DoIt_function;

v2.67

  1. New: View Scale Dlg: Swap XY Axis (optional);

  2. New: Fixed Scales on Axes;
  3. New: Saving in ini file with curves.
  4. Bug fixed: in EditCtrl_GetDouble.

v2.70

  1. New: TermoMeter (main version) + TermoSetup.

  2. New: Internal units now are the base units: A,V etc.. instead of uA,uV....

v2.71

  1. New: Derive Options Added: Discard Edges, Discard Direction.

  2. Changed: Cursor Dialog.

v2.72

  1. New: MultiCurve Ic(H) supported; MkDir in FileSave dialog.

v2.73

  1. New: Convert Unit prefixes while reading INI/DAT-file (uA-> A*10E-6);

  2. New: ESC key interrupts measurements/generator now -- It is possible to use "Enter" now to start measurements in Measure Dialog;
  3. New: Bug fixed in multiple Ic(H) -- now it interrupts correctly by ESC;
  4. New: New voltage indicators (nice, compact, colored);
  5. New: 16 Programmed/WaveForm currents supported;
  6. New: News measure function -- voltages response on waveform current supply;

  7. v2.74

  8. New: Fast 2 WaveForm Generator with programmable frequency (only 1st board)

v2.75

  1. Bug fixed: in Relative to Curve function -- now new-X-Units are the old-Y-units

v2.76

  1. Bug fixed: with old DXB input now also convert uA->1e-6A;

  2. New: Utility to convert mkA into uA in old DXB files;
  3. New: Old Generator is working when in Measurements|IVC

v2.77 of 14-jul-95

  1. New: Possibility to zoom any place of curve with mouse: LeftMouseButtonClick+DragAroundRegion+ReleaseLeftMouseButton, RightMouseButton makes zoom extents -- this feature is the same as View|Scale Dialog.

  2. Bug fixed: in X<=>Y -- now also swaps deltaX & deltaY when custom zoom.
  3. New: Checked old generator and made more reliable.

v2.78 of 5-aug-95

  1. New: Axes dialog (Menu Options|Axes);

  2. New: Enhanced (less buggy)cursors;
  3. New: More fine and configurable (via ini-file) curve properties
  4. (symbols,colors,styles);
  5. New: Switch "Current Measurement technique" -- Honest (in each point) or only on the edges of interval assuming linear behavior, If U chose "edge points" technique but interrupted the measurements by ESC U will have a part of curve measured "Honestly";
  6. New: Delay Options in Menu: options|delay
  7. New: It is Possible to open KindOf Curr&Volt in the same time
  8. New: Full MultyChannel (>10 ) support (with VertScrollbars in Corresp places)
  9. Bug fixed: in Ic(H) when out after 1st point

v2.79 of 10-Sep-95

  1. Bug Fixed: in Generator. Now it works (do not call atwdaq.dll) with emulator.

  2. New: Options|Math & Options|Ic(H) work now via general SetupDlg Procedure.

v2.80 of 23-Sep-95

  1. New: Print & PageSetup. Print sometimes works bad with Laser printers.

  2. New: Exi now looks for ini-files in exe directory then in windows directory. We suggest to keep them in exe dir to exclude garbage from windows dir.
  3. Bug fixed: in Drawing/printing

v2.81

  1. Bug fixed: in resistance measurement.

  2. New: The possibility to have user's ini file in ExI directory added. Now ExI searches for ini files 1st in ExI directory and then in Windows directory. I suggest to keep ini files in ExI directory to exclude garbage from windows directory.
  3. Note: Up to now all sizes in Options|Axes dialog are in pixels, so if you print you will need to increase them. This will be in mm in future versions.

v2.82

  1. New: LaserPrinter supported; Now all sizes in Options|Axes dialog are in physical units -- Font size in points and all other sizes in 0.1mm;

  2. New: "Save As" dialog always starts with a last directory that U used (1st time with current directory);
  3. New: Now You can draw curves just with points choosing linetype=-1 and symbol=6 in ini file;
  4. Bug fixed: in Current Voltage Connections Dialogs; ATTENTION: Now in Ic(H) "Sweep" current is used to define Ic but "Sweep2" current used to sweep magnetic field. This will exclude permanent changing between "define Ic" and "Sweep" currents in CurrentConnections dialog when you frequently change between measuring IVC and Ic(H);
  5. Bug fixed: in PageSetup dialog.

v2.83

  1. Bug fixed: few bugs of v2.82

v2.84

  1. Bug fixed: in Ic(H) when "-define_Ic" is used.

v2.85

  1. Bug fixed: with "go stop" & "go start" buttons in Measure dialog. Now all limits controls work with last touched current.

v2.86

  1. New: Two derivative windows dY/dX (X) and dY/dX (Y) now available as well as possibility to copy dY/dX (X) and dY/dX (Y) to the main window.

  2. Bug fixed: now zoom of main window works fine while derivative windows are open,
  3. Bug fixed: axes names in derivative windows are correct.

v2.87

  1. New: In Page setup dialog one more page layout added. If U choose this layout picture will be printed in upper half of the page and info on lower half.

v2.88

  1. Bug fixed: units conversion

  2. Bug fixed: printing date
  3. Bug fixed: printing zoomed curve
  4. Bug fixed: limits in IcH Measure Dlg
  5. Bug fixed: Generator in IcH Measure Dlg

v2.89

  1. Bug fixed: File I/O is more stable now.

  2. Bug fixed: in drawing

v2.90

  1. New: Super Ic(H) for Steps --Now U can measure the dependence of max current of the step vs. magnetic field

v2.91

  1. New: Now it is possible to open dat files without having accompanying ini files

v2.92

  1. New: Ic(T) semi automatic technique is implemented;

  2. Bug fixed: after switching off generator only all sweep currents reset to zero now,
  3. Bug fixed: Accelerators ^K & ^N are working now,
  4. Bug fixed: Now ExI opens temperature file when it starts,
  5. Bug fixed: Now AutoZero affects only those currents that have been "Connected",
  6. Bug fixed: delay options are read from ini file during startup,
  7. Bug fixed: "???" sometimes appears instead of voltage in Measurement dialog

v2.94 -- 15-Oct-96

  1. Bug fixed: with zoom. now 100000 is a maximum zoom

  2. Bug fixed: with drawing lines between points.

v2.95 -- 31-Oct-96 -- 32x kB

  1. New: Measurement of IVC Families

  2. New: Options|Delay Interactivity -- new settings for update rate
  3. New: Help accessible from GoldExI. Thanx to Lilli. Help File is not complete yet.
  4. New: Clear Screen
  5. New: Undo feature. cool. 8-)

v2.96 -- 17-Oct-96

Bug fix release

  1. Bug fixed: F1 and Ctrl-F1 really invoke Help now

  2. Bug fixed: with IVC limits and step (P.Caputo)
  3. New: if user's ini file doesn't exist it will be created in GoldExI's dir when U Save settings.
  4. New: if in [Users] section of user's ini-file UseExiLibDir=1, GoldExI will create directory for user under ExiLibDir
  5. New: if in [Users] section of user's ini-file StartWithExiLibDir=1, GoldExI will start from ExiLibDir/user's_Dir. Otherwise from current dir.
  6. New: user's ini file can have any extention now
  7. New: if temperature curve file is not specified it will be no alarm

v2.97 -- 9-Feb-97

  1. Bug fixed: Line type "-1" (no line, only symbols) was not working. Now use Line type "5" instead.

  2. Bug fixed: A lot of grid lines caused messed up grid while printing. Fixed


Quick jump to: [Top] [Bottom]

[Review] [Download] [Gallery] [Links]
[F.A.Q.] [HerStory] [Bugs] [Suggestions]
[Author] [EMDAQ.DLL] [Home]


Designed by Edward Goldobin. All Rights Reserved
Send feedback here.
Updated: