Features

100KHz to 2200MHz in AM, Narrow FM and Wide FM
Frequency increment: 1KHz, 5KHz, 6.25KHz, 9KHz
10KHz, 12.5KHz, 20KHz, 25KHz, 30KHz, 50KHz, 100KHz
125KHz, 150KHz, 200KHz, 250KHz,
Total 1,000 channels for scanning
Total 10 search banks
Turbo Scan mode scans at a minimum of 50 channels per second.
Turbo Search mode to searches a minimum of 30 increments per second.
Back-lit LCD and key pads
Phase inverted de-scrambler built-in
Built-in RS23C serial communication port
Built-in 9 channels of spectrum band scope function on L.C.D.
 
 

Accessories
Includes:

3 AA Hitachi NiCd batteries (600 mAh)
AC charger/adapter
DC car adapter with 12V cigarette lighter plug
6" Duck Antenna
Hand Strap
Earphone
Operating Manual
   Price

$499.00 Canadian Funds (about $333.00 US funds).
 
 

Specifications
Frequency Coverage 100KHz to 2,200MHz continuous
Receiving Modes AM, Narrow FM and Wide FM
Frequency increment  See above feature
Scan memory channels 100 CH/bank x 10 banks, total 1000 CH
Scan speed 50 CH/sec. min. in turbo mode
Search banks 10 search banks
Search Speed 30 increments/sec. min. in turbo mode
Search lock out 50 CH/bank x 10 banks, total 500 channels
Priority channel 1 CH/bank x 10 banks, total 10 priority channel
Antenna connector 50 ohm BNC connector
Power requirements 3.6VDC from 3 x AA internal Ni-Cad batteries
4.5VDC from 3 x AA manganese or alkaline
6.0 to 9.0VDC from external power source
Size 60mm(W) x 110mm(H) x 25mm(D)
Weight 200 gram including Ni-Cad. batteries
 

Additional Information:
Free software from Trident is as versatile as many commercial software packages! In order to use the scanner with the software an interface is required. We have modified the CAT-232 interface for use with this scanner. We will do the modification to the interface for you and we will supply you with the software on CD FREE of charge when you purchase the interface from us. You must ask for these FREE items when ordering.

PLEASE NOTE: The speaker/earphone jack is used to connect the scanner to the interface. Once the interface is plugged in, you will not get any sound from the scanner's internal speaker. Our modified adapter is supplied with a speaker jack. If you plan to listen to the scanner while it is connected to the computer, you will need an external speaker with a 3.5 mm plug. Extension speakers are available starting from $10.00.

Scanning tip: We recommend that you use an external antenna when the scanner is connected to the computer. This will reduce the amount of noise received from the computer. If you are in a situation where an external antenna will overload the scanner, you can try connecting the scanner to a wire antenna via a short run of coaxial cable. Please call the store if you need advice on how to do this.