1st. Make sure you
have controllers that can be moved.
*Wires must be long enough to reach outside the chassis.
top of page
top of page
top of page
top of page
|
1st. Make sure you
have controllers that can be moved. |
|
2nd
Make an extension housing similar to the one in the pattern provided. top of page |
|
3rd.
Remove electronics and cut slits for the wires. File cuts and cover edges
with silicone. top of page |
|
4th.
Use a old dash trim to line up the controllers as you install them in the
extension housings. Re-assemble and mount in car. top of page |
|
5th.
Use old dash trim section, using a utility knife with a straight edge, cut
a piece out to make a faceplate. top of page |