12. After choosing NO (N) you will get the screen as shown below.
13. You can specify the size of partition either in Percentage(%) or in Megabytes(mb).If yur hard disk is not less than 10 GB i suggest not to provide more than 25% of yur hard disk.Herer i have enter 25% for primary partition i.e. for C: drive
14. Next u'll get the "Primary Dos Partition Created" Message. After that Press Esc and u'll get the same screen as shown in step10, than choose option 2 (i.e Create Extended Dos Partition). Next screen will be as shown below.
15. Choose whatever remaining space left (automatically remaining space will be there so you just have to hit enter). Next you will get the screen as shown below.
Then press Esc to continue
16. After Pressing Esc, automatic you will get the screen as shown below.
Note:-Here most of the people made mistake,they choose only 75% if they are making two partition that is C: and D:.So what happen is remaining 25% becomes unusable.This 100% is whatever remaining % left of 75%.
17. Choose 100% if u want to make only two partition. If you want to make more than two partition specify the size of partition as your wish.(Suppose we want to make three partition C: D: and E: here if we specify 50% that will be for D: drive and remaining 50% we have to specify to D: drive)
18. After making partition, make Primary partition Active by choosing "Set Active Partition" option and Exit.
19. After Harddisk Partition compulsory you have to Format your partition drive.