| Recipes |
| Materials 1. Black Powder or Flash Powder (flash is better) 2. 2 or 3 liter soda bottle :) 3. 18"x3/4" wooden dowel (length does not matter, but it has to be able to fit into the opening of the bottle) 4. Fuse 5. Gasoline 6. drinking straw with a length equal to the radius of the bottle 7. small drill (with the same diameter as the straw 8. match heads Procedure 1. mix the powder with enough gas to make it pasty 2. fill the soda bottle with the pasty mixure 3. pack it in tightly with the dowel and put more paste in if possible 4. put the cap on the bottle 5. drill a hole in the middle of the bottle (side) 6. insert the straw in the hole (all the way, the straw should not be sticking out) 7. put about 7 match heads into the straw 8. insert the fuse so that it touches the match heads 9. the fuse is obviously thinner than the straw, so tape the hole with a piece of tape that has a small hole the same size as the fuse's diameter (just in case you're an idiot, make sure the fuse sticks out) Using this baby 1. light the fuse 2. RUN LIKE HELL!!!!!!!! I MEAN RUN, DAMNIT!!! RUN LIKE YOU HAVE NEVER RAN BEFORE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 3. WATCH THE DESTRUCTION OF THE NEIGHBORHOOD (it wont really destroy your neighborhood, but it is very, very powerful!!!!) Note: i wrote this for fun, i suggest none of you make this thing, if you do and get arrested, or blow someone up, its not my fault! do not hold me responsible for any fuckin stupid things you decide to do with this recipe!!!! |
| Death Omen 666 |
| Ping Pong Bomb |
| Materials 1. ping pong ball 2. black powder or flash powder 3. fuse 4. knife or drill 5. dowel Procedure 1. Make a hole in the ping pong ball 2. fill it with powder 3. pack the powder in tightly with the dowel 4. insert the fuse Note: you need extremely fine powder |
|
| Bucket o' death materials 1. bucket 2. durhams rock-hard water putty 3. black powder 4. 2 litter soda bottle 5. 4' or longer piece of fuse 6. gasoline procedure 1. fill the soda bottle with gas 2. fill 1/4 of the bucket with powder 3. put the bottle (standing up) in the center of the bucket 4. insert the fuse in the bottle 5. fill the rest of the bucket with powder 6. seal the top of the bucket with the putty, but be sure to make a hole on top for the fuse! note: this is VERY dangerous!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! even more dangerous than death omen 666! i dont think u should make this one, i wrote it for fun |
 |
| more to come........................ |
| Firecracker materials strip of brown grocery bag paper (3 1/2"x2') glue stick black powder fuse durhams rock-hard water putty, fiberglass resin, or epoxy procedure 1. make the strip of paper into a tube (illustration below) 2. plug one end with a 1/2 inch of the putty, resin, or epoxy 3. pour some powder in and remember to leave a 1/2 inch for another plug 4. use a nail to make a small hole in the plug for the fuse, but make sure the fuse fits TIGHTLY! youre done |
 |
