Projecting USFWS to Lambert Conformal Conic
Arc: project cover alam alam_lam
 
**************************************************
*      The INPUT projection has been defined.    *
**************************************************
Use OUTPUT to define the output projection and END
to finish.
 
Project: output
Project: projection lambert
Project: units meters
Project: parameters
1st standard parallel                             [   0  0  0.000 ]: 40 20 0
2nd standard parallel                             [   0  0  0.000 ]: 37 40 0
central meridian                                  [   0  0  0.000 ]: -105 30 0
latitude of projection's origin                   [   0  0  0.000 ]: 0 0 0
false easting (meters)                            [       0.00000 ]: 0.0
false northing (meters)                           [       0.00000 ]: 0.0

	Fixing CDOT Arc/Info coverages - county, urban, rest, hwy:
Arc: copy county countyx
prompt> cd <where>/countyx
prompt> rm prj
Arc: project cover countyx county_lam
 
Please define the input and output map projections.
Use INPUT to define the input projection, OUTPUT
to define the output projection, and END to finish.
 
Project: input
Project: projection utm
Project: zone 13
Project: datum nad83
Project: spheroid grs1980
Project: yshift 4000000
Project: units meters
Project: parameters
Project: output
Project: projection lambert
Project: datum nad83
Project: spheroid grs1980
Project: units meters
Project: parameters
1st standard parallel                             [   0  0  0.000 ]: 40 20 0
2nd standard parallel                             [   0  0  0.000 ]: 37 40 0
central meridian                                  [   0  0  0.000 ]: -105 30 0
latitude of projection's origin                   [   0  0  0.000 ]: 0 0 0
false easting (meters)                            [       0.00000 ]: 0.0
false northing (meters)                           [       0.00000 ]: 0.0
Project: end

	Builds:
Arc: build urban_lam
 Building polygons...
Arc: build hwy_lam line
 Building lines...
Arc: build rest_lam point
 Building points...
Arc: build county_lam line
 Building lines...
Arc: build alam_lam poly
 Building polygons...
 Re-building AAT...