Seats

Aftermarket Seats

Well I finally decided to purchase some aftermarket seats. I looked around for quite some time trying find the best deal while still getting good quality. I came across a pair of seats made by E Speed. I checked it out, and finally decided to bite the bullet. For the pair it was roughly a little under $400. The material is all cloth and feels quite nice, however I am a little concerned how well the seats are going to wear; I guess only time will tell. There was multiple color combinations to chose from, and I decided to just go all black.

Additional notes: Okay, the seat installation... It is fairly simple, all you have to do is remove your old seats (4 bolts). Remove the track from your old seats (4 more bolts). The front bolt of the new seats bolt into the track, then you must drill new bolt holes in the back of the track. That is not a problem at all. The last thing you have to do it widen the back holes of the track part that attaches it to the floor. This is because the new seats are 1/2" narrower. Bolt it up and your ready to go.
ONE THING I DID NOTICE IS THAT I AM 6'2", and the seats do not go as far back as the old seats. Maybe one setting closer.