ampletooling  Wen  Hing  Electronics  Metal  Co.  宏  興 電 子 五 金 公 司

Tel: ( 852 ) 2763 0383.                          Fax: ( 852 ) 2763 0123.  

Contact us



Begin soldering in only 10 seconds!
Greater thermal capacity and rapid transmission to the tip means faster thermal recovery
The temperature control sensor is built into the heating element for faster, more stable temperature control.
The highly insulated ceramic heater never overheats. An insulation factor of over 100Mohm can be maintained even during actual use.
The compact, lightweight design with high cooling efficiency at the handle permits fatigue-free soldering over long periods for maximum work efficiency.
Model No. 918 920 921 922
Power Consumption 55W
Standard Tip 918-T-B 920-T-SB 920-T-B
Temperaure 420C 300C 370C 420C
Heating Element Ceramic Heater
Insulation Resistance 100M ohm
Total Length 220mm 210mm
Weight Approx. 70g Approx. 50g

Temperature controlled soldering Gun with Solder Feeding System!
Abailable for your , Hakko 700C, 701, 926, 927, 928, 936, or 937.
ESD safe by design.
Compact and light weight.
Easy positioning for the solder feeding.
A variety of tip shape.
Model No. 951 952
Type M L
Power Consumption AC24V-50W
Temperature Range 200480C
Tip to Ground Resistance Under 2
Tip to Ground Potential Under 2mV(Typ.0.6mV)
Heating Element Ceramic Heater
Standard Tip No.900M-T-S10 No.900L-T-B
Standard Guide Nozzle Guide Nozzle forØ1.0(B2654)
Usable Solder Dia. ~0.6,0.8,1.0,1.2,1.6
Outer Dimensions 180(H) x 170(W) x 23(D)mm
Weight(Approx) 177g 187g

轉下頁   Next           主頁 Home