Temperature Program Controllers

REX-P24/48/96 Series , REX-P250 Series , REX-P300 Series

REX-P24, REX-P48 and REX-P96 Series

Features

  • 4 digit display
  • Easy to read displays
  • 0.3% accuracy
  • Simple operation
  • Compact sizes
  • Level PID
  • Auto-tune PID control
  • PV start
  • 2 programs of 8 segments can be
        held in a non-volatile memory

    • Standard Functions

  • Wide supply voltage range
  • Reset/run/hold/step selection
  • Output limiter
  • Easy selection of thermocouple input
  • Pattern link function
  • Program or fixed set point control
  • PV bias setting
  • PV ratio setting

    • Optional Functions

  • Dual temperature alarms
  • Heat/cool control
  • Time signal output
  • Pattern end output

    • External Dimensions

  • DIN size for the REX-P24 (H48 x W48mm)
  • DIN size for the REX-P48 (H48 x W96mm)
  • DIN size for the REX-P96 (H96 x W96mm)

    • REX-P250 Series

    Features

  • Designed to meet every program control application.
  • Unique "touch key" panel allows the display section to be as setting keys.
  • Audible verification of key operation.
  • Hidden key and lock function for security.
  • Mode indicators easily monitor operation mode (reset, run, fix, manual, set).
  • Optional program pattern card simplifies program pattern checking.

    • Standard Functions

  • Large program storage - a maximum of 16 segments can be stored in a pattern, and a maximum     of 16 patterns can be stored in memory.
  • Pattern link function - each program pattern can be linked together if more than 16 segments     per pattern is required. Any combination of program patterns is possible.
  • At-a-glance monitoring of a program - the program pattern number and segment under     execution can be monitored at a glance. When a program pattern card is used, progress can be     followed even more easily.
  • Autotuning learning function - obtained PID values may be different even in the same load     because of a different set level. The use of the "AT learning function" allows a maximum of 8     optimum PID values to be automatically obtained in advance for use in the program.
  • PV start - if a process value is at a certain level when program control is started, the program     start level can be specified to the present PV level.
  • Hold/wait/step selection.

    • Optional Functions

  • Maximum of 2 alarms
  • Analog output
  • Heater break alarm (HBA)
  • SP-1 program pattern selection
  • Digital interface (RS-232C or RS-422A)

    • REX-P300 Series

    Features

  • 5 digit display
  • Easy to read displays
  • 16 programs of 16 segments can be
        held in a non volatile memory
  • 0.1% accuaracy
  • Simple operation
  • Compact size
  • Mode control - program fixed or manual
  • Level PID
  • Fuzzy logic at fixed set point control
  • PV start
  • Time signal outputs
  • Universal input

    • Standard Functions

  • PV bias/PV ratio
  • Input filter
  • Wide supply voltage range
  • Hold/wait/step selection
  • Pattern end output time setting
  • Output limiter
  • Bumpless transfer from automanual

    • Optional Functions

  • Dual temperature alarms
  • Square root extractor
  • Digital communications RS-485
  • Heat/cool control
  • Dust and waterproof protection to IP65

    • External Dimensions

  • DIN size for the REX-P300 (H96 x W96mm)

    • back