Manoj Reddy's Reference Guide

clear atm vc

To release a specified switched virtual circuit (SVC), use the clear atm vc EXEC command.

clear atm vc vcd

Syntax Description

vcd 

Virtual channel descriptor of the channel to be released.

Command Modes

EXEC

Command History

ReleaseModification
11.0

This command was introduced.

Usage Guidelines

For multicast or control VCCs, this command causes the LANE client to exit and rejoin an emulated LAN.

For data VCCs, this command also removes the associated LANE Address Resolution Protocol (LE ARP) table entries.

Examples

The following example releases SVC 1024:

clear atm vc 1024

Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003

All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.