To force a LANE server to drop a client and allow the LANE configuration server to assign the client to another emulated LAN, use the clear lane server EXEC command.
clear lane server {interface slot/port [. subinterface-number] | name elan-name} [mac-address mac-address | client-atm-address atm-address | lecid lane-client-id | route-desc segment segment-numberbridge bridge-number]
clear lane server {interface number [. subinterface-number] | name elan-name} [mac-address mac-address | client-atm-address atm-address | lecid lecid | route-desc segment segment-numberbridge bridge-number]
interface slot / port [. subinterface-number] Interface or subinterface where the LANE server is configured for the Cisco 7500 series. The space between the interface keyword and the slot argument is optional.
interface number [. subinterface-number] Interface or subinterface where the LANE server is configured for the Cisco 4500 or 4700 routers. The space between the interface keyword and the numberargument is optional.
name elan-name Name of the emulated LAN on which the LANE server is configured. Maximum length is 32 characters.
mac-address mac-address (Optional) Keyword and LANE client's MAC address.
client-atm-address atm-address (Optional) Keyword and LANE client's ATM address.
lecid lane-client-id (Optional) Keyword and LANE client ID. The LANE client ID is a value between 1 and 4096.
route-desc segment segment-number (Optional) Keywords and LANE segment number. The segment number ranges from 1 to 4095.
bridge bridge-number (Optional) Keyword and bridge number that is contained in the route descriptor. The bridge number ranges from 1 to 15.
EXEC
| Release | Modification | 11.0 | This command was introduced. |
|---|
After changing the bindings on the configuration server, use this command on the LANE server to force the client to leave one emulated LAN. The LANE server will drop the Control Direct and Control Distribute VCCs to the LANE client. The client will then ask the LANE configuration server for the location of the LANE server of the emulated LAN it should join.
If no LANE client is specified, all LANE clients attached to the LANE server are dropped.
The following example forces all the LANE clients on the emulated LAN red to be dropped. The next time they try to join, they will be forced to join a different emulated LAN.
clear lane server name red
| Command | Description |
|---|---|
| client-atm-address name | Adds a LANE client address entry to the configuration database of the configuration server. |
| lane database | Creates a named configuration database that can be associated with a configuration server. |
| mac-address | Sets the MAC layer address of the Cisco Token Ring. |
| show lane server | Displays global information for the LANE server configured on an interface, on any of its subinterfaces, on a specified subinterface, or on an ELAN. |
Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003
All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.