To define the character you enter at a vacant terminal to begin a terminal session, use the activation-character line configuration command. Use the no form of this command to make any character activate a terminal.
activation-character ascii-number
no activation-character
ascii-number Decimal representation of the activation character.
Return (decimal 13)
Line configuration
| Release | Modification | 10.0 | This command was introduced. |
|---|
See the "ASCII Character Set" appendix for a list of ASCII characters.
If you are using the autoselect function, set the activation character to the default, Return, and exec-character-bits to 7. If you change these defaults, the application will not recognize the activation request.
The following example sets the activation character for the console to Delete, which is Decimal 127:
line console activation-character 127
Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003
All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.