To start a session on a manager dial or router shelf, use the attach shelf EXEC command.
attach shelf shelf-number
shelf-number Number of the shelf to attach to. The number can range from to 9999.
EXEC
| Release | Modification | 11.3 AA | This command was introduced. |
|---|
If you are connected to a system controller, use this command to start a session with a managed shelf.
If you are already connected to a shelf unit, this command disconnects from the current shelf and connects to the specified shelf.
In the following example, a user connects to a managed shelf from the system controller from user EXEC mode. Notice that the user connects to the shelf at the current user privilege level.
systemcont> show syscon
Shelf# 2 172.23.66.102 SDB update 09:09:16 PST Jan 27 1998
systemcont> attach shelf 2
Trying 172.23.66.102 ... Open
shelf2> show syscon
Current uptime 09:10:00 PST Jan 27 1998, system controller 172.23.66.100
Last hello packet received at 09:09:16 PST Jan 27 1998
8625 Total SDP packets
0 packets with bad MD5 hash
4311 Hello packets received
4314 Hello packets sent
0 Command packets received
0 Command packets sent
shelf2> quit
[Connection to 172.23.66.102 closed by foreign host]
systemcont>| Command | Description |
|---|---|
| syscon address | Specifies the system controller for a managed shelf. |
| syscon shelf-id | Specifies a shelf ID for a managed shelf. |
Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003
All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.