Manoj Reddy's Reference Guide

clear cdp counters

To reset CDP traffic counters to zero (0), use the clear cdp counters privileged EXEC command.

clear cdp counters

Syntax Description

This command has no arguments or keywords.

Command Modes

Privileged EXEC

Command History

ReleaseModification
10.3

This command was introduced.

Examples

The following example clears the CDP counters. The show cdp trafficoutput shows that all of the traffic counters have been reset to zero (0).

Router# clear cdp counters
Router# show cdp traffic

CDP counters:
        Packets output: 0, Input: 0
        Hdr syntax: 0, Chksum error: 0, Encaps failed: 0
        No memory: 0, Invalid packet: 0, Fragmented: 0

Related Commands

CommandDescription
clear cdp table Clears the table that contains CDP information about neighbors.
show cdp traffic Displays traffic information from the CDP table.

Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003

All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.