Manoj Reddy's Reference Guide

clear cdp table

To clear the table that contains CDP information about neighbors, use the clear cdp table privileged EXEC command.

clear cdp table

Syntax Description

This command has no arguments or keywords.

Command Modes

Privileged EXEC

Command History

ReleaseModification
10.3

This command was introduced.

Examples

The following example clears the CDP table. The output of the show cdp neighborscommand shows that all information has been deleted from the table.

Router# clear cdp table

CDP-AD: Deleted table entry for neon.cisco.com, interface Ethernet0
CDP-AD: Deleted table entry for neon.cisco.com, interface Serial0
Router# show cdp neighbors

Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
                  S - Switch, H - Host, I - IGMP

Device ID        Local Intrfce     Holdtme    Capability  Platform  Port ID

Related Commands

CommandDescription
show cdp neighbors Displays information about neighbors.

Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003

All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.