To set the time zone for display purposes, use the clock timezone global configuration command. To set the time to Coordinated Universal Time (UTC), use the no form of this command.
clock timezone zone hours [minutes]
no clock timezone
zone Name of the time zone to be displayed when standard time is in effect.
hours Hours offset from UTC.
minutes (Optional) Minutes offset from UTC.
UTC
Global configuration
| Release | Modification | 10.0 | This command was introduced. |
|---|
The system internally keeps time in UTC, so this command is used only for display purposes and when the time is manually set.
The following example sets the timezone to Pacific Standard Time and offsets 8 hours behind UTC:
clock timezone PST -8
| Command | Description |
|---|---|
| calendar set | Sets the system calendar. |
| clock set | Manually set the system clock. |
| clock summer-time | Configures the system to automatically switch to summer time (daylight savings time). |
| show clock | Displays the system clock. |
Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003
All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.