To configure the constant bit rate (CBR) for the ATM circuit emulation service (CES) for an ATM permanent virtual circuit (PVC) on the Cisco MC3810, use the cbr command. Use the no form of this command to restore the default.
cbr rate
no cbr rate
rate Constant bit bate (also known as the average cell rate) for ATM CES. The valid range for this command is from 56 to 10,000 kbps.
ATM virtual circuit configuration
| Release | Modification | 12.0 | This command was introduced. |
|---|
This command applies to ATM configuration on the Cisco MC3810.
The following example configures the constant bit rate on ATM PVC 20 on the Cisco MC3810:
pvc 20 cbr 56
| Command | Description |
|---|---|
| ces cell-loss-integration-period | Sets the CES cell-loss integration period on the Cisco MC3810 multiservice concentrator. |
| ces clockmode synchronous | Configures the ATM CES synchronous clock mode on the Cisco MC3810 multiservice concentrator. |
| ces connect | Maps the CES service to an ATM PVC on the Cisco MC3810 multiservice concentrator. |
| ces initial-delay | Configures the size of the receive buffer of a CES circuit on the Cisco MC3810 multiservice concentrator. |
| ces max-buf-size | Configures the send buffer of a CES circuit on the Cisco MC3810 multiservice concentrator. |
| ces max-buf-size | Configures the send buffer of a CES circuit on the Cisco MC3810 multiservice concentrator. |
| ces partial-fill | Configures the number of user octets per cell for the ATM CES on the Cisco MC3810 multiservice concentrator. |
| ces service | Configures the ATM CES type on the Cisco MC3810 multiservice concentrator. |
| encapsulation atm-ces | Enables CES ATM encapsulation on the Cisco MC3810 multiservice concentrator. |
Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003
All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.