Manoj Reddy's Reference Guide

ces clockmode synchronous

To configure the ATM CES synchronous clock mode, use the ces clockmode synchronous interface configuration command. Use the no form of this command to restore the default value.

ces clockmode synchronous

no ces clockmode synchronous

Syntax Description

This command has no arguments or keywords.

Defaults

Enabled

Command Modes

Interface configuration

Command History

ReleaseModification
11.3 MA

This command was introduced.

Usage Guidelines

This command applies to ATM configuration on the Cisco MC3810.

This command maps into the transmit clock source of the CBR interface. This command is supported on serial ports 0 and 1 when set for CES ATM encapsulation.

Examples

The following example sets the ATM CES clock to synchronous mode on serial port 0:

interface serial 0
 ces clockmode synchronous

Related Commands

CommandDescription
encapsulation atm-ces Enables CES ATM encapsulation on the Cisco MC3810 multiservice concentrator.

Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003

All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.