To enable the router to pass routing updates to other routers over the AUX port configured as an asynchronous interface, use theasync default routing interface configuration command. Use the no form of this command to disable dynamic addressing.
async default routing
no async default routing
This command has no keywords or arguments.
Disabled
Interface configuration
| Release | Modification | 10.0 | This command was introduced. |
|---|
Use the async default routing command to define the default behavior for router-to-router communication over connections to the AUX port configured as an asynchronous interface. This command is commonly used to enable two routers to communicate over an async dial backup link.
To require a remote user to manually configure routing over connections to the AUX port configured as an asynchronous interface, use the async dynamic routing command.
The following example enables routing over asynchronous interface 0:
interface async 0 async default routing
| Command | Description |
|---|---|
| async dynamic routing | Enables manually configured routing on an asynchronous interface. |
Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003
All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.