To clear all group entries from the Catalyst switches' caches, use the clear ip cgmp EXEC command.
clear ip cgmp [typenumber]
type number (Optional) Interface type and number.
EXEC
| Release | Modification | 11.1 | This command was introduced. |
|---|
This command sends a CGMP Leave message with a group address of 0000.0000.0000 and a unicast address of 0000.0000.0000. This message instructs the switches to clear all group entries they have cached.
If an interface type and number are specified, the Leave message is sent only on that interface. Otherwise, it is sent on all CGMP-enabled interfaces.
The following example clears the CGMP cache:
clear ip cgmp
| Command | Description |
|---|---|
| ip cgmp | Enables CGMP on an interface of a router connected to a Catalyst 5000 switch. |
Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003
All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.