To clear the active or checkpointed database when IP accounting is enabled, use the clear ip accounting EXEC command.
clear ip accounting [checkpoint ]
checkpoint (Optional) Clears the checkpointed database.
EXEC
| Release | Modification | 10.0 | This command was introduced. |
|---|
You can also clear the checkpointed database by issuing the clear ip accounting command twice in succession.
The following example clears the active database when IP accounting is enabled:
clear ip accounting
| Command | Description |
|---|---|
| ip accounting | Enables IP accounting on an interface. |
| ip accounting-list | Defines filters to control the hosts for which IP accounting information is kept. |
| ip accounting-threshold | Sets the maximum number of accounting entries to be created. |
| ip accounting-transits | Controls the number of transit records that are stored in the IP accounting database. |
| show ip accounting | Displays the active accounting or checkpointed database or displays access list violations. |
Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003
All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.