To configure automatic line disconnect, use theautohangup line configuration command. This command causes the EXEC to issue the exit command when the last connection closes. Use the no form of this command to disable automatic line disconnect.
autohangup
no autohangup
This command has no arguments or keywords.
Disabled
Line configuration
| Release | Modification | 10.0 | This command was introduced. |
|---|
This command is useful for UNIX UUCP applications that automatically disconnect lines because UUCP scripts cannot issue the exit command to hang up the telephone.
The following example enables automatic line disconnect on lines 5 through 10:
line 5 10 autohangup
Printed for apswan@ctr.ap.nic.in on Wed Mar 5 22:32:57 PST 2003
All material in this document copyright 2000 Cisco Systems, Inc. All rights reserved. No material may be reproduced or distributed without written permission of Cisco Systems, Inc.