Material Data Sheet

Material Class:

Stainless Steel

Material Identification Numbers:

Composition:

19 - 21 Cr, 10.50 - 13 Ni, 0.12 C, 2.0 Mn, 0.75 Si, 0.045 P, 0.030 S

Physical Strength:

Annealed ( 0 oF)

Tensile Strength (psi):

85000

Yield Strength (psi):

35000

Hardness (Bhn):

150

Hardened and Tempered (Tempering Range 0 - 0 oF)

Tensile Strength (psi):

0    -    0

Yield Strength (psi):

0    -    0

Hardness (Bhn):

0    -    0

Density (lbs/in3):

0

Melting Point (oF):

0

Applications:

This stainless has a higher alloy content then most. This increases its heat and corrosion resistance. It is typically used as welding filler since it will compensate for alloy loss that occurs during welding.

Notes:

This is a Austenitic stainless steel.



(Values of 0 are unknown or not applicable)

Date Entered:  3/25/01    Last Revised:  4/17/01

Return to the Main Page

All information displayed here is for REFERENCE ONLY.  There are no guaranties on the accuracy or completeness of this page.  If you find errors on this page or whish to summit additional information on this material or other any other steel,  please go to the submission page.