Material Data Sheet

Material Class:

Stainless Steel

Material Identification Numbers:

Composition:

17 - 19 Cr, 9 - 12 Ni, 0.08 C, 2.0 Mn, 0.75 Si, 0.045 P, 0.030 S, [Ti, 5(C + N) min, 0.70 max], 0.10 max

Physical Strength:

Annealed ( 2000 oF)

Tensile Strength (psi):

87000

Yield Strength (psi):

35000

Hardness (Bhn):

150

Hardened and Tempered (Tempering Range 0 - 0 oF)

Tensile Strength (psi):

0    -    0

Yield Strength (psi):

0    -    0

Hardness (Bhn):

0    -    0

Density (lbs/in3):

0

Melting Point (oF):

0

Applications:

Notes:

Heat Treatment - Heat to 1750 - 2050oF and cool rapidly. To stablize, heat to 1550 - 1650oF for one hour per inch thickness and cool by air. For stress relieving, heat to 1300oF for one to two hours and air cool.

Welding - When using AISI 347 filler rod, this material displays good welding charateristics.

Heat Resistance - This material has good oxidation resistance when used intermittently up to 1600oF and continuously up to 1700oF. This material performs as well in range of 800 - 1600oF.

This is a Austenitic stainless steel.



(Values of 0 are unknown or not applicable)

Date Entered:  3/29/01    Last Revised:  4/17/01

Return to the Main Page

All information displayed here is for REFERENCE ONLY.  There are no guaranties on the accuracy or completeness of this page.  If you find errors on this page or whish to summit additional information on this material or other any other steel,  please go to the submission page.