Material Data Sheet

Material Class:

Stainless Steel

Material Identification Numbers:

Composition:

0.06 C, 4.0 - 6.0 Mn, 0.04 P, 0.08 S, 1.00 Si, 20.5 - 23.5 Cr, 11.5 - 13.5 Ni, 1.5 - 3.0 Mo, (0.20 - 0.40 N, 0.10 - 0.30 CB, 0.10 - 0.30 V)

Physical Strength:

Annealed ( 0 oF)

Tensile Strength (psi):

0

Yield Strength (psi):

0

Hardness (Bhn):

0

Hardened and Tempered (Tempering Range 0 - 0 oF)

Tensile Strength (psi):

0    -    0

Yield Strength (psi):

0    -    0

Hardness (Bhn):

0    -    0

Density (lbs/in3):

0

Melting Point (oF):

0

Applications:

Notes:

Hardening - This material is not hardenable by using thermal processes.

General - This is a nitrogen strengthened austenitic stainless. It has better corrosion resistance and about double the yield strength than AISI 316 stainless steel. Nitronic 50 has very good mechanical properties at both high and low temperatures. It is non magnetic.



(Values of 0 are unknown or not applicable)

Date Entered:  4/17/01    Last Revised:  4/18/01

Return to the Main Page

All information displayed here is for REFERENCE ONLY.  There are no guaranties on the accuracy or completeness of this page.  If you find errors on this page or whish to summit additional information on this material or other any other steel,  please go to the submission page.