Material Data Sheet

Material Class:

Stainless Steel

Material Identification Numbers:

• 301 - AISI
• 5517 - 5519 - AMS
• 5902 - AMS
• S30100 - UNS

Composition:

16 - 18 Cr, 6 - 8 Ni, 0.15 C, 2.0 Mn, 0.75 Si, 0.045 P, 0.030 S

Physical Strength:

Annealed ( 2000 ^oF)

Tensile Strength (psi):

110000

Yield Strength (psi):

40000

Hardness (Bhn):

165

Hardened and Tempered (Tempering Range 0 - 0 ^oF)

Tensile Strength (psi):

125000    -    185000

Yield Strength (psi):

75000    -    140000

Hardness (Bhn):

265    -    400

Density (lbs/in³):

0

Melting Point (^oF):

0

Applications:

Hight work-hardening rate. This material is used where high strength plus high ductility is required.

Notes:

This stainless is an Austenitic Stainless.

Heat Treatment - This material is not hardened using heat treatment techniques. It is hardened by work hardening. This steel will work harden excessively.

This is a Austenitic stainless steel.

(Values of 0 are unknown or not applicable)

Date Entered:  3/25/01    Last Revised:  4/17/01

Return to the Main Page

All information displayed here is for REFERENCE ONLY.  There are no guaranties on the accuracy or completeness of this page.  If you find errors on this page or whish to summit additional information on this material or other any other steel,  please go to the submission page.