| A-Body Mopar Windshield Lockstrip and Accessories |
 |
 |
 |
 |
| Chrome
Mylar Lockstrip WLS-848 A great replacement for 1963-1966 Mopar A body front and rear glass lockstrip. front windshield uses 14 feet Barracuda rear glass used 16 feet. |
| Windshield
and rear glass sealant. Black butyl sealant CRL7711 Same as originally used from factory. Windshield Sealant is a one-part, ready-to-use sealant for resealing windshields and backlites. Also useful for sealing drip rails and pinchwelds after installation of vinyl hardtops. Cures to a tough, flexible, rubbery bead powerful adhesion to glass, butyl tape, and all metal surfaces. A copy of the factory sealant instructions will be included. One tube is usually enough to seal front and rear glass. |
| Chrome
metal lockstip splice Used on front or rear to splice joint in lockstrip. |
 |
| Smooth domed
shape fits original gasket nicely. Not as original but a very nice replacement. click on image for larger photo. |
 |
| Installation Tool 7 1/2" long taper nylon "stick" A universal glazing tool used to spread gasket for installing lockstrip. Very useful for smoothing sealant and installing glass. There is also availible a tapered end and chisel end stick. Specify which one you want, or better yet get one of each. You will find numerous uses for this stick all around your shop. Color of stick may be green or white. |
 |
| Rick
Mazanec 572 Hawthorne Woods Drive Eagan MN 55123 651-796-6213 --7:00 to 3:00 CST paypal and e-mail address rickmazanec@yahoo.com |
| Please E-Mail me with your
requirements rickmazanec@yahoo.com |
| 2" Wide
Moleskin Channel Liner Repairs Badly Worn Channels Shims Loose Glass CRL Moleskin Tape is a black-colored, fine felt bonded to an adhesive-coated backing film. It has many diverse uses, such as acting as a liner for glass run channel or a cushion between showcase glass and frames or as a protective liner on the bottom of objects to be displayed on glass shelves. |
 |
| www.oocities.org/mazmatic_ebay/accessories |
| These are links to photos of the lockstrip being
installed |
 |
 |
 |
 |
 |
 |
|
 |
| Rather use EBAY? I usually have some of these
items listed on Ebay auctions on a regular basis. click here to check my current auction items click here to see my Ebay feedback rating |
 |
 |
 |
 |
 |
| 1963
1964 1965 1966 Barracuda Valiant Dart, A-Body Windshield Gasket. This is a reproduction windshield gasket. It is a top quality reproduction with molded corners just like the original. This is the same gasket sold by most rubber suppliers.It fits all hardtops and sedans, will not fit convertibles. It accepts the original lockstrip or the replacement lockstrip listed here. $95.00 plus shipping also available are rear window gaskets for 1964-1966 Barracudas |
 |
 |
| This is a end
profile of the original stock lockstip (on the right) compared to the
replacement shape. The original measures .580" x .220" The new one measures .511" x .250" Although slightly smaller I have found it to fit perfectly in stock gaskets. |
| New Items |
 |
 |
| Cat
Whisker Clips These are the clips that hold the fuzzy weatherstrip to the door or quarter window frame. They can be crimped onto the fuzzy weatherstrip with a pair of Vise-Grip pliers. |
 |
 |
| Door Panel
Clips These are the clips that hold the door panels on. I have used them on my 1965 Barracuda. They will fit 1963 thru 1976 Mopar Cars and probably a lot more cars too. Compare the picture to be sure this is what you need. |