What you get

This is what you get with a Robin Hood Series III kit

Click for larger pictures

The Series III Stainless Steel Body Chassis unit
The Series III monocoque body/chassis unit is made from 1 mm mirror like stainless steel with all the structural sections made from thicker 1.5mm stainless steel. It is a complete monocoque body/chassis unit and does not require any additional welding, bolting together or main panels fitting to it. It has terrific torsional rigidity, with excellent occupant safety and protection. It does not require painting. Nearly all the holes and apertures have been pre-cut, these include provision for fitting the whole of the donor vehicles heating and demister system dashboard instruments, handbrake and gear lever, fuse box and pedals. Apertures are also pre-cut to assist fitment of the petrol tank, exhaust, suspension, steering components, wipers, engine mountings and many more. The whole of the scuttle (the panel the windscreen sits on) is detachable.
Included with the body/chassis unit are also....

COMPONENTS

Pair of turning cycle wings
Pair of rear wings.						(All self coloured either red or green)
Nose cone.

PANELS
One stainless steel bonnet with louvres.
Stainless steel pedal box cover.
One servo mounting panel.
Back braced roll over bar
Crumple zone front bumper bar

LIGHTING SET
Two chrome headlamps.
Two sealed beam units.
Two front flasher lamps
Two rear lights with tapered plinths.        (All lamps E marked)
Two rear fog lamps.
One number plate light.
Two reversing lamps.

WINDSCREEN ASSEMBLY
One aluminium windscreen frame.
Toughened glass windscreen.       (BS Kite marked)
Pair of windscreen pillars.
Windscreen rubber.
Wiper blade kit

FUEL SYSTEM
Stainless steel fuel tank and gaskets.
Locking fuel filler cap.
Fuel pipe.
Fuel tank straps and fixing bolts.

EXHAUST SYSTEM
Stainless steel, low noise, silencer.
Stainless tube, balanced, true 4 into 1, performance manifold.

INTERIOR TRIM AND WEATHER GEAR
Individual traditional style seats.
Superior, newly designed carpet set, pre-cut and bound sections, easy to fit, grey with contrasting binding
Dashboard covering material.
One map bag.
Hood, frame, sidescreens and fittings, top quality with welded windows.
11 " Mountney leather rimmed steering wheel
Steering wheel boss.
Set of Belcar gauges-ammeter, oil pressure, vacuum, water temperature and tachometer
Pair of seat harnesses.        (Fully approved)
Edge finishing strip
Large roll of vinyl tape.
Seat support bar.
One tin of glue

STEERING AND SUSPENSION COMPONENTS
Pair of front, top wishbones.
Pair of lower, track control arms.
Pair of front springs and shock absorbers.
Steering shaft
Steering rack
Pair of rear springs and shock absorbers
Pair of steering and suspension joints, bushes and Track rod ends.
Steering column bush.
Steering column support bracket.

MISCELLANEOUS
Universally jointed propshaft with grease nipples,
Pair of six metal brake pipes and four flexi pipes.
Pair of ventilated discs
Wiring loom.
Radiator.
Engine mountings (fitted to body)
Gearbox support panel.
Pair of four bonnet catches.
Pair of turning front wing stays.
Pair nose cone grille and fixing brackets.
Demister vents.
Nose cone badge.
Rear number plate bracket.
Pair of rear wing stone guards and beading.
Tube of silicone sealant and gun.
Bonnet edge strips.
Spare wheel bolt
Shock absorber spanner.
Boot infill panels.
Dummy rear wing piping.
Rear suspension covers
Rear body top angle.
Rear shock absorber brackets.
Rear strengthening plates.
Drill bits and metal off cuts.