![]() |
Gears necessary should be made ready at slack water. |
![]() |
Gears will include 20-25mm slack wires, a smaller wire about 10mm or fiber rope, a boatswain's chair, equipments for breaking joining shackles. |
![]() |
Operation to be started as soon as ship swung to new stream. |
![]() |
Turns are hove above the water line. |
![]() |
Cable below turn lashed together. |
![]() |
Sleeping cable is unshackled on the deck. |
![]() |
A preventer may be used to prevent sudden loss of the parted cable and stress. |
![]() |
A wire messenger then passed down through the hawse pipe, dipped around the riding cable, and returned to the forecastle deck. |
![]() |
One inboard end of the wire is secured to the joining shackles, other end to the wrapping drum. |
![]() |
Easing wire may surge on the bitts. It can be led to a wrapping barrel or may be veered under power. |
![]() |
The messenger is hove and the easing wire is eased. |
![]() |
When one turn is cleared, the weight taken off the stoppers. |
![]() |
The wire is then cast off. The procedures are repeated until the cable is cleared. |
![]() |
Later, the joining shackle is joined, preventer cast off and fiber lashing burned through. |