These are bugs that were found and fixed.

Revision Bugs that were fixed Date Released
1.0.6 Inital Release - line up with the release by Uros Platise 06/02/2000
     

Beta versions:

Revision Bugs that were fixed Date Released
1.1.2.0 - changed the input parameters style using / instead of --
- changed hardcoded parts database to parts.dat
- added Delay Factor to ini files
- clean up error handing. Made it simular to MBErrorHandler
- made error reflect filename.*
- synchronized with CommonRoutines
08/17/2001
1.1.1.9 -disabled test mode
-Fixed Swap bytes for flash & tested both flash and eeprom
-fixed config menu for direct address entry
11/16/2000
1.1.1.8 -enabled debug information 11/14/2000
1.1.1.7 -fixed Big vs little Endian in the read and writing the hex file 11/07/2000
1.1.1.6 -Fixed issues with Read and Writing Intel/Motorola Hex
-added defualt buffer value
-added saving values to the ini file
-Defualt buffer value
-Dumping Rol, Column widths
-HexFormat for outputing
11/06/2000
1.1.1.5 -Fixed issue with the size of the hex file (orginally based off a sequencial hex file)
-fixed setting the reset to high when done and re-initialing the PSPI.
-added sign fill upload for unknown extention. if no ext is specified it will try
to add .eep, .fla, .eeprom, and .flash to the filename to program both eeprom and flash
11/01/2000
1.1.1.4 -Corrected the port address for the com Ports
-fixed the re-initialization of the IO Port
-changed SDK200 to STK200
10/30/2000
1.1.1.3 -Fixed issue uploading a hex file the does not start at address 0x0000
-improved menus for setting up the Configurations
-Added more terminal menu items:
-Enable
-Disable
-Config
-Added setting the Programmer to Inputs to Tri-State the reset and other programming pins
-added the IO disabling parameter to the ini file
-fixed the help for the command terminal
10/30/2000
1.1.0.0 -Added Port Pin configurations
-Saved Base Address, and the IO configuration to ini file
-user select able Ini files
07/25/2000

If there any comments or complaints please fill out a feedback form.

Thank and have a nice day.