|
To Prevent Pollutions Of Water By
Letting The Pollute Water Returns To Its Original Stable State By Using The
Effect Of Electric Field
History of Development
This product is a unique product
which gathers the technology of the study of the property of water, bioscience,
chemistry and electric field. It had gone through a certain long period of
research and development before it arrives here today. To address the problem of
crystallization and oxidization in the treatment of water in industry, we
therefore introduce part of the technology know how of this research to the
public.
Method Use
By passing an electric field and creating an
electric field frequency and help the pollute water to return to
its stable state.
Basic Principle
By passing a high potential
electric energy that comes in contact with the water directly.
This energy reacts will the water causing it to manifest an environment
full of electric field frequency.
This
electric field frequency will cause the water to exacerbate certain property changes. The results of the changes in water property with
respect to the same potential difference between the water and the earth
plus the changes in water property with respect to the potential difference between the water property and electric field results
in this product called Clean Aqua.
By using electric field, not
only will the water return to its stable original state, but also allows the crystallization and oxidation of mineral from the piping system to break up into small clusters that is readily to be dissolve once again into the water.
Clean Aqua will have no effect beside on the crystallize and oxidize material. In the case of cooling tower,
scaling and corrosion. In the case of Emergency water storage tanks, preserving
the water from harmful bacteria.
Theory and Effects of Scale
Cleaning
Scales are created when colloidal
inorganic halomorphic are derived by ion and building up at the core. Colloidal
inorganic halomorphic such as calcium and silica are in cooling/heating-water.
Clean Aqua equipped with the negative electric pole that shoots electrons and
forms negative electrostatic field, thus negative electric charges are supplied
constantly into the water when the water pass by the electric pole during
circulation. The negative electric charges in the water destroy the ionic bond
of scales and make scales softened and melted to its original forms before
sedimentation.
In ducts, scales are combined with
the ionic bond and electrically neutral. The negative electric charges will
destroy the ionic bond of scales and scales will form in colloidal again.
Treatment of the duct before and
after Clean Aqua without any use of chemical
Sample A: Result after using Clean Aqua depends on the water condition of that region and it may not necessary be the same as below.
 
BEFORE AFTER
Benefit of Treatment of Water
By letting the water to pass
through a stable electric field, it will help to change a close loop of water
plant system. The benefit are as follows:
1.
Pollution-free
2. Life
lengthening with whole equipment (condenser, pipes and etc)
3. Prevent
accretion with scales
4. Remove and
Prevent rust
5. Reduce
Running Cost
6. Reduce the
maintaining process
7. Improve the
cooling effect of the tower
8. Hard water
can also be treated effectively
The device can incorporate an O3 accessory to remove bacteria propagation.
Basic Property of Clean Aqua
Type 3 (recommended for Use outside Japan)
Water flow: 200 tones/hour
Voltage : 100 volts
Electrical usage: 56 watts (with Ozone).
About 1.2 kwh/month.
The device is safe proof and no possibility of getting any electric
shock.
Understanding Water and It's
Properties
Briefly speaking, there are 2 types
of water. Hard water (contain more minerals and etc in the water) and soft water
(less mineral in the water)
For hard water, more mineral
dissolve in the water, easily for crystallization to occur during evaporations
as the water is more saturated (i.e. it cannot hold the mineral dissolve in the
soluble states for long hours) that is to say, more scaling will occur.
For soft water, more room for
minerals or solvent to dissolve in it. Less saturated. That is it wills
crystallization less readily. However because it has more room to dissolve,
corrosion becomes a common problem. The water will tend to corrode the pipes.
To solve the problem of corrosion
and scaling. A lot of chemical has to be input into the water to treat the
water. Or they have to put high cost devices to treat the water and removing
scaling.
Putting chemical: water become
polluted, more water need to supply into the system as the water becomes more
saturated. The system becomes more inefficient because the hard water cannot
take away the heat more readily.
Putting more costly device like
machine or rust resistance pipes, the cost will be very high.
At the system, certain temperature
(areas) will tend to promote bacteria growth. This will cause health problems if
it gets into the drinking system. Big problem will occur.
Clean Aqua will solve both
corrosion and scaling and bacteria problems. In Japan, their return cost
investment is within 10 months or so from using CLEAN AQUA device. Saving
on water itself. Not to mention about electricity and pipes changing and
efficiency.
TOP^ |
BSS Technology 
