Paramètres related to :

Paramètres related to :

Programs.

Symbol		Param	Bit		Description
PRG9	0010		4	1= Prgrm and Sub-prgrm from 9000 to 9999 are protected.
G01	0011		6	1= G01 Mode at power on; 0= G00 Mode at power on.
SBKM	0011		5	1= Single block active in macros; 0= Not active.
CPRD	0015		7	1= If no decimal point, unit is mm or inch; 0= Least input incr.
REP	0015		6	1= New entered prgrm replace old one; 0= Doesn’t replace, alarm.
SUPM	0016		2	1= Start up B type type effective with Cut. Comp. 0= Not effective
SQTYP	0018		4	Program restart should be : 1= R type; 0= P or Q type.
M02NR	0019		5	1= Return to head of program after executing M02.
G91	0030		7	When power on : 1= G91; 0= G90 Mode is set.
SSCA1	0041		5	Set the reference axis for C.S.S. Calculation.
SSCA0	0041		4	Set the reference axis for C.S.S. Calculation.
DAT16M	0055		6	Set the data distribution time (msec) of G05.
DAT4MS	0055		5	Set the data distribution time (msec) of G05.
DAT2MS	0055		4	Set the data distribution time (msec) of G05.
ITPCNT	0055		5	Interpolation time in high speed cycle machining.
MIC	0057		3	1= At omission of Decimal point, min. unit x 10.
M3B	0065		7	1= Max. 3 M codes can be designated in one block.
MBUF1	0111			Set the 1^st M Code not subject to buffering.
MBUF2	0112			Set the 2^nd M Code not subject to buffering.
PSRNQ1	0124			Order of movement to DNR restart position in prgrm of X axis.
PSRNQ2	0125			Order of movement to DNR restart position in prgrm of Y axis.
PRSNQ3	0126			Order of movement to DNR restart position in prgrm of Z axis.
PRSNQ4	0127			Order of movement to DNR restart position in prgrm of 4^th axis.
INTPLN	0212			0= G17 1= G18 2= G19 is select at power on.
SEQINC	0550			Increment value on automatic insertion of sequence number.
G05NOM	0597			Max. simultaneous axis during G05 specification.

Programs.

Symbol

Description

PRG9

1= Prgrm and Sub-prgrm from 9000 to 9999 are protected.

G01

1= G01 Mode at power on; 0= G00 Mode at power on.

SBKM

1= Single block active in macros; 0= Not active.

CPRD

1= If no decimal point, unit is mm or inch; 0= Least input incr.

REP

1= New entered prgrm replace old one; 0= Doesn’t replace, alarm.

SUPM

1= Start up B type type effective with Cut. Comp. 0= Not effective

SQTYP

Program restart should be : 1= R type; 0= P or Q type.

M02NR

1= Return to head of program after executing M02.

G91

When power on : 1= G91; 0= G90 Mode is set.

SSCA1

Set the reference axis for C.S.S. Calculation.

SSCA0

Set the reference axis for C.S.S. Calculation.

DAT16M

Set the data distribution time (msec) of G05.

DAT4MS

Set the data distribution time (msec) of G05.

DAT2MS

Set the data distribution time (msec) of G05.

ITPCNT

Interpolation time in high speed cycle machining.

MIC

1= At omission of Decimal point, min. unit x 10.

M3B

1= Max. 3 M codes can be designated in one block.

MBUF1

Set the 1st M Code not subject to buffering.

MBUF2

Set the 2nd M Code not subject to buffering.

PSRNQ1

Order of movement to DNR restart position in prgrm of X axis.

PSRNQ2

Order of movement to DNR restart position in prgrm of Y axis.

PRSNQ3

Order of movement to DNR restart position in prgrm of Z axis.

PRSNQ4

Order of movement to DNR restart position in prgrm of 4th axis.

INTPLN

0= G17 1= G18 2= G19 is select at power on.

SEQINC

Increment value on automatic insertion of sequence number.

G05NOM

Max. simultaneous axis during G05 specification.

Set the 1^st M Code not subject to buffering.

Set the 2^nd M Code not subject to buffering.

Order of movement to DNR restart position in prgrm of 4^th axis.