Paramètres related to :

Paramètres related to :

Rigid tapping.

Symbol		Param	Bit		Description
SRGTP	0019		4	Rigid tapping Selection signal : 1= G130.5 0= G123.1
VALT	0037		6	1= Time const. Is steplessly switched in rigid tapping.
VALPC	0063		3	1= Opt. Gear ratio is used between Spdl & Position coder.
TPSUP	0254			Spindle and Z axis acc/dec : 0= Exponential; 1= Linear.
BKL9	0255			Spindle backlash amount in the rigid tapping (0-127).
MCODE	0256			M Code to specify the rigid tapping mode (0-256).
RGOVG	0258			Used to set the override value at drawing in rigid.
TPFDT	0613			Acc/dec time constant of spdl. And Z axis in msec.
TPFFL	0614			Lower speed limit at expon. Acc/dec (Z and spindle).
TLPG	0615			Position control loop gain between spindle and Z axis.
LPGM9	0616			Loop gain multiplier of spdl. In high peed range.
TPSMX	0617			Maximum allowable speed on spdl. In rigid tapping.
TPIPZ	0618			Z axis in position width in the rigid tapping mode.
INP9	0619			Spindle in position width in the rigid tapping mode.
TPERZ	0620			Error lmt. Of pos. Deviation during Z move in rigid tapping.
TPER9	0621			Error lmt. Of pos. Deviation of spindle move in rigid tapping.
TPESZ	0622			Limit of position deviation at stop of Z axis.
TPES9	0623			Limit of position deviation at stop of spindle.
LGM9M	0624			Spindle loop gain multiplier for middle gear.
LGM9H	0625			Spindle loop gain multiplier for high gear.
ERR9	0627			Spindle position deviation value (Diagnose only).
IPL9	0628			Spindle distribution amount in rigid tapping (Diagnose only).
GRPLW	0663			Nbr. Of teeth of 1^st spdl. Gear at opt. Gear ratio.
GRPMD	0664			Nbr. Of teeth of 2^nd spdl. Gear at opt. Gear ratio.
GRPHI	0665			Nbr. Of teeth of 3^rd spdl. Gear at opt. Gear ratio.
GRQLW	0666			Nbr. Of teeth of 1^st gear in psn. Coder at opt. Gear ratio.
GRQMD	0667			Nbr. Of teeth of 2^nd gear in psn. Coder at opt. Gear ratio.
GRQHI	0668			Nbr. Of teeth of 3^rd gear in psn. Coder at opt. Gear ratio.
TPLGL	0669			Pos. Control loop gain of Z and Spdl of 1^st stage.
TPLGM	0670			Pos. Control loop gain of Z and Spdl of 2^nd stage.
TPLGH	0671			Pos. Control loop gain of Z and Spdl of 3^rd stage.
ABS9	0799			Spindle distribution cumulative value (Diagnostic).

Rigid tapping.

Symbol

Description

SRGTP

Rigid tapping Selection signal : 1= G130.5 0= G123.1

VALT

1= Time const. Is steplessly switched in rigid tapping.

VALPC

1= Opt. Gear ratio is used between Spdl & Position coder.

TPSUP

Spindle and Z axis acc/dec : 0= Exponential; 1= Linear.

BKL9

Spindle backlash amount in the rigid tapping (0-127).

MCODE

M Code to specify the rigid tapping mode (0-256).

RGOVG

Used to set the override value at drawing in rigid.

TPFDT

Acc/dec time constant of spdl. And Z axis in msec.

TPFFL

Lower speed limit at expon. Acc/dec (Z and spindle).

TLPG

Position control loop gain between spindle and Z axis.

LPGM9

Loop gain multiplier of spdl. In high peed range.

TPSMX

Maximum allowable speed on spdl. In rigid tapping.

TPIPZ

Z axis in position width in the rigid tapping mode.

INP9

Spindle in position width in the rigid tapping mode.

TPERZ

Error lmt. Of pos. Deviation during Z move in rigid tapping.

TPER9

Error lmt. Of pos. Deviation of spindle move in rigid tapping.

TPESZ

Limit of position deviation at stop of Z axis.

TPES9

Limit of position deviation at stop of spindle.

LGM9M

Spindle loop gain multiplier for middle gear.

LGM9H

Spindle loop gain multiplier for high gear.

ERR9

Spindle position deviation value (Diagnose only).

IPL9

Spindle distribution amount in rigid tapping (Diagnose only).

GRPLW

Nbr. Of teeth of 1st spdl. Gear at opt. Gear ratio.

GRPMD

Nbr. Of teeth of 2nd spdl. Gear at opt. Gear ratio.

GRPHI

Nbr. Of teeth of 3rd spdl. Gear at opt. Gear ratio.

GRQLW

Nbr. Of teeth of 1st gear in psn. Coder at opt. Gear ratio.

GRQMD

Nbr. Of teeth of 2nd gear in psn. Coder at opt. Gear ratio.

GRQHI

Nbr. Of teeth of 3rd gear in psn. Coder at opt. Gear ratio.

TPLGL

Pos. Control loop gain of Z and Spdl of 1st stage.

TPLGM

Pos. Control loop gain of Z and Spdl of 2nd stage.

TPLGH

Pos. Control loop gain of Z and Spdl of 3rd stage.

ABS9

Spindle distribution cumulative value (Diagnostic).

Nbr. Of teeth of 1^st spdl. Gear at opt. Gear ratio.

Nbr. Of teeth of 2^nd spdl. Gear at opt. Gear ratio.

Nbr. Of teeth of 3^rd spdl. Gear at opt. Gear ratio.

Nbr. Of teeth of 1^st gear in psn. Coder at opt. Gear ratio.

Nbr. Of teeth of 2^nd gear in psn. Coder at opt. Gear ratio.

Nbr. Of teeth of 3^rd gear in psn. Coder at opt. Gear ratio.

Pos. Control loop gain of Z and Spdl of 1^st stage.

Pos. Control loop gain of Z and Spdl of 2^nd stage.

Pos. Control loop gain of Z and Spdl of 3^rd stage.