Paramètres related to :

Paramètres related to :

Stroke limit.

Symbol		Param	Bit		Description
OTZN	0008		6	1= Z axis stored stroke check is not done; 0= Is done.
LM2	0015		4	1= Stroke limit 2 sign. Valid; 0= Stroke limit 2 sign. Invalid.
INOUT	0024		4	1= Outside 2^nd stroke limit is forbidden area; 0= Inside.
HOT3	0057		5	A signal of hardware 0T is : 1= Valid; 0= Invalid.
LT1X1	0700			Stroke limit 1 located right to ref. point X axis.
LT1Y1	0701			Stroke limit 1 located right to ref. point Y axis.
LT1Z1	0702			Stroke limit 1 located right to ref. point Z axis.
LT141	0703			Stroke limit 1 located right to ref. point 4^th axis.
LT1X2	0704			Stroke limit 1 located left to ref. point X axis.
LT1Y2	0705			Stroke limit 1 located left to ref. point Y axis.
LT1Z2	0706			Stroke limit 1 located left to ref. point Z axis.
LT142	0707			Stroke limit 1 located left to ref. point 4^th axis.
LT2X1	0743			Ext. stroke limit 2 located right to ref. point on X axis.
LT2Y1	0744			Ext. stroke limit 2 located right to ref. point on Y axis.
LT2Z1	0745			Ext. stroke limit 2 located right to ref. point on Z axis.
LT241	0746			Ext. stroke limit 2 located right to ref. point on 4^th axis.
LT2X2	0747			Ext. stroke limit 2 located left to ref. point on X axis.
LT2Y2	0748			Ext. stroke limit 2 located left to ref. point on Y axis.
LT2Z2	0749			Ext. stroke limit 2 located left to ref. point on Z axis.
LT242	0750			Ext. stroke limit 2 located left to ref. point on 4^th axis.
LT3X1	0804			Stroke limit 3 located right to ref. point on X axis.
LT3Y1	0805			Stroke limit 3 located right to ref. point on Y axis.
LT3Z1	0806			Stroke limit 3 located right to ref. point on Z axis.
LT3X2	0807			Stroke limit 3 located left to ref. point on X axis.
LT3Y2	0808			Stroke limit 3 located left to ref. point on Y axis.
LT3Z2	0809			Stroke limit 3 located left to ref. point on Z axis.
LT171	0821			Stroke limit 1 located right to ref. point on 7^th axis.
LT181	0822			Stroke limit 1 located right to ref. point on 8^th axis.
LT172	0823			Stroke limit 1 located left to ref. point on 7^th axis.
LT182	0824			Stroke limit 1 located left to ref. point on 8^th axis.
LT151	7700			Stroke limit 1 located right to ref. point on 5^th axis.
LT161	7701			Stroke limit 1 located right to ref. point on 6^th axis.
LT152	7704			Stroke limit 1 located left to ref. point on 5^th axis.
LT162	7705			Stroke limit 1 located left to ref. point on 6^th axis.

Stroke limit.

Symbol

Description

OTZN

1= Z axis stored stroke check is not done; 0= Is done.

LM2

1= Stroke limit 2 sign. Valid; 0= Stroke limit 2 sign. Invalid.

INOUT

1= Outside 2nd stroke limit is forbidden area; 0= Inside.

HOT3

A signal of hardware 0T is : 1= Valid; 0= Invalid.

LT1X1

Stroke limit 1 located right to ref. point X axis.

LT1Y1

Stroke limit 1 located right to ref. point Y axis.

LT1Z1

Stroke limit 1 located right to ref. point Z axis.

LT141

Stroke limit 1 located right to ref. point 4th axis.

LT1X2

Stroke limit 1 located left to ref. point X axis.

LT1Y2

Stroke limit 1 located left to ref. point Y axis.

LT1Z2

Stroke limit 1 located left to ref. point Z axis.

LT142

Stroke limit 1 located left to ref. point 4th axis.

LT2X1

Ext. stroke limit 2 located right to ref. point on X axis.

LT2Y1

Ext. stroke limit 2 located right to ref. point on Y axis.

LT2Z1

Ext. stroke limit 2 located right to ref. point on Z axis.

LT241

Ext. stroke limit 2 located right to ref. point on 4th axis.

LT2X2

Ext. stroke limit 2 located left to ref. point on X axis.

LT2Y2

Ext. stroke limit 2 located left to ref. point on Y axis.

LT2Z2

Ext. stroke limit 2 located left to ref. point on Z axis.

LT242

Ext. stroke limit 2 located left to ref. point on 4th axis.

LT3X1

Stroke limit 3 located right to ref. point on X axis.

LT3Y1

Stroke limit 3 located right to ref. point on Y axis.

LT3Z1

Stroke limit 3 located right to ref. point on Z axis.

LT3X2

Stroke limit 3 located left to ref. point on X axis.

LT3Y2

Stroke limit 3 located left to ref. point on Y axis.

LT3Z2

Stroke limit 3 located left to ref. point on Z axis.

LT171

Stroke limit 1 located right to ref. point on 7th axis.

LT181

Stroke limit 1 located right to ref. point on 8th axis.

LT172

Stroke limit 1 located left to ref. point on 7th axis.

LT182

Stroke limit 1 located left to ref. point on 8th axis.

LT151

Stroke limit 1 located right to ref. point on 5th axis.

LT161

Stroke limit 1 located right to ref. point on 6th axis.

LT152

Stroke limit 1 located left to ref. point on 5th axis.

LT162

Stroke limit 1 located left to ref. point on 6th axis.

1= Outside 2^nd stroke limit is forbidden area; 0= Inside.

Stroke limit 1 located right to ref. point 4^th axis.

Stroke limit 1 located left to ref. point 4^th axis.

Ext. stroke limit 2 located right to ref. point on 4^th axis.

Ext. stroke limit 2 located left to ref. point on 4^th axis.

Stroke limit 1 located right to ref. point on 7^th axis.

Stroke limit 1 located right to ref. point on 8^th axis.

Stroke limit 1 located left to ref. point on 7^th axis.

Stroke limit 1 located left to ref. point on 8^th axis.

Stroke limit 1 located right to ref. point on 5^th axis.

Stroke limit 1 located right to ref. point on 6^th axis.

Stroke limit 1 located left to ref. point on 5^th axis.

Stroke limit 1 located left to ref. point on 6^th axis.