3D Models and 3D Parts in the latest Inventor. Note: check back as I am always adding to my list.
If you need a specific Timkens part drop me a line at ogermer@sympatico.ca

Timken taper roller bearing assemblies and parts

File

07196 CUP (1.9687 OD),07204 CUP (2.0470) and 07100 CONE(1 ID), 07087 CONE (7/8 ID)Download the file, file 1.1 mg
1220 CUP (2 1/4 OD) and 1280 CONES -7/8 IDDownload the file, file 0.6 mg
15590 CUP (2 1/4 OD) and 15520 CONES -1 1/8 IDDownload the file, file 0.6 mg
02420 CUP (2 11/16 OD) and 02473 (1 ID) 02474 (1 1/8 ID) 02475 (1 1/4 ID) CONES Download the file, file 0.9 mg
2720 CUP (3 OD) and 2790 (1 5/16 ID) 2793 (1 3/8 ID) CONES -7/8 IDDownload the file, file 0.8 mg
563 CUP (5 OD) and 567(2 7/8"ID), 568(2.9062 ID), 569(2.5576 ID) CONESDownload the file, file 0.9 mg
493 CUP (5 3/8 OD) and 496 (3 3/16 ID),495 (3 1/4 ID),498 (3 5/16 ID), 497 (3 3/8 ID) CONESDownload the file, -- 1.2 mg
6420 CUP (5 7/8 OD) and 6460 (2 7/8 ID),6461 (3 ID), CONESDownload the file, -- 730k
48320 CUP (7 1/2 OD) and 48385 CONE (5 1/4 ID) 48393 CONE (5 3/8 ID)Download the file, -- 0.9 mg
95925 CUP (9 1/4 OD) and 95525 CONE (5 1/4 ID) 95500 CONE (5 ID) 95475 CONE (4 3/4 ID)Download the file, -- 0.8 mg
93125 CUP (12 1/2 OD) and 93750 CONE (7 1/2 ID) 93787 CONE (7 7/8 ID) 93825 CONE (8 1/4 ID)Download the file, -- 0.9 mg
ABMA Standard locknuts -- 60 sizes. Note -- open Inventor thread.xls in design data folder and cut and paste the first page from my Thread -Add.xls to Program Files/Autodesk/Inventor__/Design Data/Threads.xls
I have added the ASME B1.1-1989 standard UN and UNS Threads to the excel sheet PLUS the threads needed for the additional locknut thread sizes.(They are highlighted in the spread sheet.) Without this addition the nuts will not generate.
Download the file, --0.2 Mg
Timkens tongued washer. All of the inch sizes. Download the file, --0.7 Mg
ABMA Standard inch tongued lockwashers. 110 sizes for the Locknut. Rev.Nov.10/02 Divided into tab bend under nut, tab bend away from nut and a no bend tab. Download the file, --0.7 Mg