Hercules - Economy - Jaeger - Arco

Early 4hp Sparta Economy Pushrod

This 4hp Sparta Economy pushrod is made from  3/4" square stock. The half nuts are fitted to the 7/8" x 9 NC thread. Complete assembly includes shoulder bolt, roller, detent catch block and 2 - 7/8 half nuts. We've left the round end slightly long so that exact length can be made during your installation.

Complete pushrod assembly (as shown above) -- $175.00

Roller, Shoulder bolt & jam nut  -- $50.00

Detent catch block 3/4 x 3/4 - $14.95Complete unit Wrist Pin & Bushing -- $18.95

2 - 7/8 -9nc half nuts - $12.00

Bare pushrod  machined - $110.00

1 1/2 & 2hp Wrist Pin & Bushing

1 1/2 and/or 2hp Hercules, Economy, Jaeger and Arco Wrist Pin and Bushing. Wrist pin is .625" diameter X 3.045 long, end has .050 long taper to center . The oil-lite bronze bushing is .625"ID X .875 OD X 1" long and has a drilled oil hole and ID oil groove. Always check your original before ordering.

Wrist Pin -- $11 ea.

Bushing -- $8.95 ea.

Complete unit Wrist Pin & Bushing -- $18.95

12hp Economy "J" Fuel Mixer 

"J" type mixer for the 12hp Economy gasoline engine. Pipe thread is 2".. Completely machined and tapped for needle valve, gas line and choke plate.

              Needle Valve & Choke Plate sold separately

Mixer  $265.00 + shipping

*** 1 1/2hp --  2 1/2hp  -- 3hp -- 5hp -- 6hp -- 7hp & 9hp coming soon ***

Needle Valves for the "J" type mixer

Hercules, Jaeger, Arco & Economy  "J" type  mixer needle valves. Machined from high grade steel and peened in like the originals.  5/16" NC thread - length 3 1/4",  Adjustment wheel 1 1/4" diameter.

Needle Valve  $19.95 ea.

Flyball Governor Speed Control Parts

Governor Assembly for engines from 1-1/2 to 12HP 

#9 Exhaust Rocker arm 1 1/2hp & 2hp  - $19.95 ea.  machined complete $25.95 ea.  

New Governor parts 1 - 5 are shown on original Economy Governor Castings

#1 Governor Speed Control Lever  - $5.95 ea.  

#2 Governor Speed Control Swing Pin 5/16"  - $5.50 ea.

#3 Governor Detent Blade (single square hole blade)  - $19.95 ea.  

#4 Governor Speed Control Adjusting Screw  - $8.95 ea.

#5 Governor Detent bolt & nut  - $4.95 ea.  

#6 Governor plate  - $22.50 ea.   -   machined complete $34.95 ea.

#7 Governor Detent lever old style  - $12 ea.   -   machined complete $17.95 ea. 

#8 Governor Detent lever adjustable  - $12 ea.   -   machined complete $19.95 ea.

Special Offers - Governor Assembly Rebuild Kit - Includes 1 each 1-5 --- $39.95

Governor Assembly Complete - parts 1 - 8 with choice of Detent lever (7or 8) type - $72.00

5 and 6 Horsepower Exhaust Rocker Arm

Exhaust Rocker Arm - Casting  $23.95

Exhaust Rocker Arm - Casting Machined (as shown) - $29.95

1 1/2 hp Push Rod Assembly

1 1/2hp Hercules or Jaeger Hit & Miss engine igniter trip rod assembly. Unit is furnished complete with cam roller assembly and detent catch. Push rod measures 17"  X  3/4" X  3/8". Detent catch hole is threaded 1/4" NC and the cam roller hole is threaded 3/8" NC.. --- We will make similar parts up for your other Hercules / Economy / Jaeger / Arco engines per your sample or sketch.

Price $60 

1 1/2 hp Push Rod & Catch

Push rod measures 17"  X  3/4" X  3/8". Detent catch hole is threaded 1/4" NC and the cam roller hole is threaded 3/8" NC. We will make similar parts up for your other Hercules / Economy / Jaeger / Arco engines per your sample or sketch.

Price $45 

1 1/2 hp Push Rod Cam Roller & Shoulder Bolt

Push Rod Cam Roller Assembly - all parts shown. We will make similar parts up for your other Hercules / Economy / Jaeger / Arco engines per your sample or sketch. Separate parts priced upon request.

Price $25

Detent Catch - 1 1/2hp

Detent catch measures 1" X 1" X  1/4" and is made from tool steel. Detent catch hole is countersunk for 1/4" CS bolt included. We will make similar parts up for your other Hercules / Economy / Jaeger / Arco engines per your sample or sketch.

Price $14.95 

Send mail to ottosideshaft@yahoo.com with questions or comments about this web site. 

This site was last modified on 06/26/2005