October 2004	Installing the air intake manifold
		I added a spacer to the air intake because the cobra value covers were a little taller than the stock value covers. I then  installed the fuel injectors and  the injector wiring harness.  Hint:  Do this before mounting the  air intake or you will have to remove the air intake to get the wiring on the fuel injectors.  Voice of experience speaking.
		The air intake is installed.  You can also see that I cut the A/C bracket to remove all the unwanted metal that was not functional. I was now able to run my throttle cable. It is a tight fit but it does fit.
		I asked the folks on the forum if this was the right place for the throttle connection.  It was. Yahoo, my seats and side pipes have arrived!! The side pipes are the newer 4 port pipes with is good.  But this means I need a new Catalytic converter and mounting hardware for the newer pipes.
	Factory Five                  FFR Discussion Forum	Total hours so far:  73 hours
	Home                                                    Previous Next
	questions / comments drop me an email