ENGINE PARTS

Work to clean the engine parts that will be used again is complete. The items shown here were cleaned then sand blasted. They will be painted later. Every engine nut and bolts was also cleaned and stored.

The engine block and heads are at the machine shop. The cylinders in the block will be bored out 30 thousands. The search is on for a rebuild kit or separate components that will produce a 10.1: 1 compression ratio using our 88 cc heads, the stock 3.750 ” stroke crank and new 6.768 ” connecting rods.

Check out these not so clean pieces. Most will not be reused.

http://pg.photos.yahoo.com/ph/robertmitchell32000/album?.dir=f3efre2&.src=ph&...