DRIVER DOOR BLOCK SANDED

Sheet metal repair and paint preparation work on the driver side door is complete. The cracks in the metal near the latch screw holes were repaired by welding in new metal then re-drilling the hole. The holes punched in the area of the rear view mirror to hold the mirror on with wire have been welded shut, ground down, body filler applied then the filler sanded smooth. Additionally, the mounting screw holes for the mirror were reinforced then drilled to the proper diameters. Finally the door was primed and block sanded.

The passenger side door is now under going the same type repairs and preparation work as was done on the driver door.