Here are some pictures of the shed.

Parts list:

Floor:

Sill: 2x8x12' PT = 4
2x8x8' PT = 4
Joists: 2x6x8' PT = 8
Hangers: = 16 (+ hangers for Sil)
Flooring: 4x8x3/4"PT = 3
Blocking: 2x4x8' PT = 2


Side Walls:

Studs: 2x4x6' = 18
Cap/Sill Plate: 2x4x8' = 6
Sheathing T1-11: 4x8x = 4
Blocking: 2x4x6' = 2

Front/Back Walls:

Studs: 2x4x6' = 20
2x4x8' = 3 (cut for upper walls)
Cap/Sill Plate: 2x4x12' = 6
Sheathing T1-11: 4x8x = 8
Trim: 1x3x8' = 4
1x4x8' = 4
1x4x12 = 2


Roof:

Ridge/Tail: 2x6x10' = 3
Rafters: 2x6x8' = 18
Cross Ties: 2x4x8' = 7
Soffit Support: 2x4x6' = 2
Ridge Support: 2x2x6' = 1
Sheathing CDX: 4x8x5/8" = 6
Felt: 15 lb = 160 sf
Shingles: = 160 sf
Drip Edge: = 52 ft
Soffit: 4x8x1/2" = 3
Front Trim: 1x8x8' = 4
Side Trim: 1x8x10' = 2


Door:

Door/Frame Trim 1x3x8' = 6

Ramp:


Nails (Galvanized):

2d: Floor Hanger (side) = 64 (1/2 lb)

8d: Floor Hanger (end) [64]
Flooring [130]
Siding [540]
Roof Decking [270]
Rim Joist (side) [128]
Cap Plate [128]
Cross Ties [56]
Roof Rafters [108]
Tail [36]
General Bracing [156]
Total = 1360 (16 lbs)
or (20 lbs ring nails)

10d: Stud Framing [193]
Sill to Floor [52]
Rim Joist (end) [16]
Total = 261 (5 lbs)
or (6 lbs ring nail)

3/4" Roofing Nails

Finish nails for trim/door

Hinges = 6


General Info:

nails:
2d = 1" long, 740/lb, 400/lb (ring)
8d = 2.5" long, 88/lb, 68/lb (ring)
10d = 3" long, 60/lb, 48/lb (ring)


Nail every 8"
Back Prime Flooring
Keep siding 6" above ground
1/16" gap on roofing
2" overlap on roofing felt
1/2" shingle overhang

Load / Deflection for simply supported
wood beams and max. point load.

Double 2x8x12 = 1890 lbs = 1/3" @ 1000lbs
Double 2x10x12 = 3000 lbs = 1/8" @ 1000lbs